gpsTime
Module: CMM3-MIB
OID (symbolic): CMM3-MIB::gpsTime
OID (numeric): 1.3.6.1.4.1.161.19.3.4.5.2
Node type: OBJECT-TYPE
Type: DisplayString
Access: read-only
Description: CMM-III GPS time.
What is gpsTime?
This read-only DisplayString reports the current time as derived from the GPS receiver. It gives an admin a way to confirm the unit's timing source is producing a sane, current time value rather than a stale or default one. If gpsTime reported on a unit lags real time by hours, an admin would suspect the GPS receiver has lost lock rather than trusting the displayed sync status alone.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.161.19.3.4.5.2 snmpwalk -v2c -c public <target> CMM3-MIB::gpsTime
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.161.19.3.4.5.2.1 snmpget -v2c -c public <target> CMM3-MIB::gpsTime.1
Start monitoring cable headend hardware modules with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CMM3-MIB::gpsTime OID value, configure state conditions and alerts, and monitor any cable headend hardware modules from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.161 | mot | WHISP-GLOBAL-REG-MIB |
| 1.3.6.1.4.1.161.19 | whispRoot | WHISP-GLOBAL-REG-MIB |
| 1.3.6.1.4.1.161.19.3 | whispProducts | WHISP-GLOBAL-REG-MIB |
| 1.3.6.1.4.1.161.19.3.4 | whispCMM | WHISP-GLOBAL-REG-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.161.19.3.4.5 | cmmGps | CMM3-MIB |
| 1.3.6.1.4.1.161.19.3.4.5.2 | gpsTime | CMM3-MIB |