All MIBs › CMM3-MIB › gpsLongitude
gpsLongitude
Module: CMM3-MIB
OID (symbolic): CMM3-MIB::gpsLongitude
OID (numeric): 1.3.6.1.4.1.161.19.3.4.5.9
Node type: OBJECT-TYPE
Type: DisplayString
Access: read-only
Description: CMM longitude.
What is gpsLongitude?
This read-only DisplayString reports the longitude coordinate the GPS receiver has fixed for the unit's location. Paired with gpsLatitude, it lets an admin verify the reported GPS fix actually matches the physical installation site. A mismatch between gpsLongitude and the site's known coordinates would lead an admin to question the antenna placement or GPS fix quality before relying on the unit as a timing master.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.161.19.3.4.5.9 snmpwalk -v2c -c public <target> CMM3-MIB::gpsLongitude
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.161.19.3.4.5.9.1 snmpget -v2c -c public <target> CMM3-MIB::gpsLongitude.1
Start monitoring cable headend hardware modules with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CMM3-MIB::gpsLongitude OID value, configure state conditions and alerts, and monitor any cable headend hardware modules from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.161 | mot | WHISP-GLOBAL-REG-MIB |
| 1.3.6.1.4.1.161.19 | whispRoot | WHISP-GLOBAL-REG-MIB |
| 1.3.6.1.4.1.161.19.3 | whispProducts | WHISP-GLOBAL-REG-MIB |
| 1.3.6.1.4.1.161.19.3.4 | whispCMM | WHISP-GLOBAL-REG-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.161.19.3.4.5 | cmmGps | CMM3-MIB |
| 1.3.6.1.4.1.161.19.3.4.5.9 | gpsLongitude | CMM3-MIB |