All MIBs › CMM3-MIB › gpsHeight
gpsHeight
Module: CMM3-MIB
OID (symbolic): CMM3-MIB::gpsHeight
OID (numeric): 1.3.6.1.4.1.161.19.3.4.5.6
Node type: OBJECT-TYPE
Type: DisplayString
Access: read-only
Description: CMM height.
What is gpsHeight?
This read-only DisplayString reports the CMM unit's height as used by the GPS receiver for its position fix, mirroring the same elevation value exposed as height elsewhere in this MIB. It matters for the same reason: an inaccurate elevation input can subtly reduce GPS timing precision. An installer cross-checking a site survey against the device would compare gpsHeight to the surveyed antenna elevation to confirm the GPS configuration matches reality.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.161.19.3.4.5.6 snmpwalk -v2c -c public <target> CMM3-MIB::gpsHeight
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.161.19.3.4.5.6.1 snmpget -v2c -c public <target> CMM3-MIB::gpsHeight.1
Start monitoring cable headend hardware modules with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CMM3-MIB::gpsHeight OID value, configure state conditions and alerts, and monitor any cable headend hardware modules from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.161 | mot | WHISP-GLOBAL-REG-MIB |
| 1.3.6.1.4.1.161.19 | whispRoot | WHISP-GLOBAL-REG-MIB |
| 1.3.6.1.4.1.161.19.3 | whispProducts | WHISP-GLOBAL-REG-MIB |
| 1.3.6.1.4.1.161.19.3.4 | whispCMM | WHISP-GLOBAL-REG-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.161.19.3.4.5 | cmmGps | CMM3-MIB |
| 1.3.6.1.4.1.161.19.3.4.5.6 | gpsHeight | CMM3-MIB |