All MIBs › CME-MIB › vlanCMMState
vlanCMMState
Module: CME-MIB
OID (symbolic): CME-MIB::vlanCMMState
OID (numeric): 1.3.6.1.4.1.2.3.51.2.4.9.1.20.20.1.5
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This object indicates whether this VLAN entry is enabled or disabled and allows the user to disable, enable or restart this entry except for the exceptions noted below.
The entry with a vlanCMMIndex value of 1 (default VLAN entry) will always have this object set to enable(1) and cannot be set to any other value. Other table entries do not have this restriction.
Some other objects in this table may not take effect after a change until either this object is: set to enable(1) if this object currently has the value of disable(0), or set to restart(2) if this object currently has the value of enable(1). The other objects in this table that require this object be set to enable(1) or restart(2) after a change are noted in the description for those objects.
What is vlanCMMState?
This read-write enumerated object disables, enables, or restarts a VLAN entry, with the default VLAN entry (index 1) permanently locked to enable(1) and unable to be set otherwise, while other entries are not restricted this way. An administrator uses this to activate or deactivate a non-default VLAN entry, or to restart it to pick up a changed VLAN ID. For example, an admin sets this to restart(2) on a non-default VLAN entry after changing its vlanCMMVlanId, so the new VLAN ID actually takes effect.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2.3.51.2.4.9.1.20.20.1.5 snmpwalk -v2c -c public <target> CME-MIB::vlanCMMState
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2.3.51.2.4.9.1.20.20.1.5.1 snmpget -v2c -c public <target> CME-MIB::vlanCMMState.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.2.3.51.2.4.9.1.20.20.1.5.1 i <value>
Start monitoring Cisco Communications Manager Express (CME) router/gateway with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CME-MIB::vlanCMMState OID value, configure state conditions and alerts, and monitor any Cisco Communications Manager Express (CME) router/gateway from a single console.
OID Breakdown
Upper-level ancestors (13 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2 | ibm | BLADE-MIB |
| 1.3.6.1.4.1.2.3 | ibmAgents | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51 | netfinitySupportProcessorAgent | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2 | bladeCenterSnmpMIB | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2.4 | configureSP | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2.4.9 | networkConfiguration | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2.4.9.1 | networkInterfaces | BLADE-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2.3.51.2.4.9.1.20 | vlanConfigure | CME-MIB |
| 1.3.6.1.4.1.2.3.51.2.4.9.1.20.20 | vlanCMMTable | CME-MIB |
| 1.3.6.1.4.1.2.3.51.2.4.9.1.20.20.1 | vlanCMMEntry | CME-MIB |
| 1.3.6.1.4.1.2.3.51.2.4.9.1.20.20.1.5 | vlanCMMState | CME-MIB |