All MIBs › CME-MIB › vlanCMMIPv6SubnetRoutePrefixLen3
vlanCMMIPv6SubnetRoutePrefixLen3
Module: CME-MIB
OID (symbolic): CME-MIB::vlanCMMIPv6SubnetRoutePrefixLen3
OID (numeric): 1.3.6.1.4.1.2.3.51.2.4.9.1.20.20.1.96
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This object sets the IPv6 address prefix length of the subnet route 3 for this VLAN entry.
The entry with the vlanCMMIndex value of 1 (default VLAN entry) will have this object set to the IP address of the ethernet interface. The IP address of the default VLAN entry can only change by changing the IP address of the ethernet interface.
For all other VLAN entries, this object may be set to any IP address except the IP address of the ethernet interface.
For a change of this object to take effect, the object, vlanCMMState, must be set to enable(1) if the vlanCMMState is currently disable(0), or set to restart(2) if the vlanCMMState is currently enable(1).
What is vlanCMMIPv6SubnetRoutePrefixLen3?
This writable object supplies the prefix length for the third static IPv6 subnet route (vlanCMMIPv6SubnetRoute3). Since routes 1-3 are independently sized subnets, this value must be set to match however the fd00:40:: destination is actually subnetted. An admin routing to fd00:40:: in route 3 would commonly set this prefix length to 64.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2.3.51.2.4.9.1.20.20.1.96 snmpwalk -v2c -c public <target> CME-MIB::vlanCMMIPv6SubnetRoutePrefixLen3
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2.3.51.2.4.9.1.20.20.1.96.1 snmpget -v2c -c public <target> CME-MIB::vlanCMMIPv6SubnetRoutePrefixLen3.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.2.3.51.2.4.9.1.20.20.1.96.1 i <value>
Start monitoring Cisco Communications Manager Express (CME) router/gateway with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CME-MIB::vlanCMMIPv6SubnetRoutePrefixLen3 OID value, configure state conditions and alerts, and monitor any Cisco Communications Manager Express (CME) router/gateway from a single console.
OID Breakdown
Upper-level ancestors (13 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2 | ibm | BLADE-MIB |
| 1.3.6.1.4.1.2.3 | ibmAgents | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51 | netfinitySupportProcessorAgent | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2 | bladeCenterSnmpMIB | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2.4 | configureSP | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2.4.9 | networkConfiguration | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2.4.9.1 | networkInterfaces | BLADE-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2.3.51.2.4.9.1.20 | vlanConfigure | CME-MIB |
| 1.3.6.1.4.1.2.3.51.2.4.9.1.20.20 | vlanCMMTable | CME-MIB |
| 1.3.6.1.4.1.2.3.51.2.4.9.1.20.20.1 | vlanCMMEntry | CME-MIB |
| 1.3.6.1.4.1.2.3.51.2.4.9.1.20.20.1.96 | vlanCMMIPv6SubnetRoutePrefixLen3 | CME-MIB |