All MIBs › CME-MIB › vlanCMMIPv6SubnetRoute3
vlanCMMIPv6SubnetRoute3
Module: CME-MIB
OID (symbolic): CME-MIB::vlanCMMIPv6SubnetRoute3
OID (numeric): 1.3.6.1.4.1.2.3.51.2.4.9.1.20.20.1.95
Node type: OBJECT-TYPE
Type: InetAddressIPv6
Access: read-write
Description: This object sets the IPv6 address of the subnet route 3 for this VLAN entry.
The entry with the vlanCMMIndex value of 1 (default VLAN entry) will always have this object set to 0.0.0.0.
For all other VLAN entries, this object may be set to any valid subnet route.
For a change of this object to take effect, the object, vlanCMMState, must be set to enable(1) if the vlanCMMState is currently disable(0), or set to restart(2) if the vlanCMMState is currently enable(1).
What is vlanCMMIPv6SubnetRoute3?
This writable object stores the IPv6 address of a third static subnet route for a VLAN entry, fixed at all-zero for the default VLAN. It's the third and last configurable IPv6 destination a VLAN entry can route to directly, useful when management traffic must reach three separate IPv6 subnets from one VLAN. An admin might use route 3 to point VLAN entry 3 at fd00:40:: for a dedicated NTP/time-sync subnet, then set vlanCMMState to enable(1).
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2.3.51.2.4.9.1.20.20.1.95 snmpwalk -v2c -c public <target> CME-MIB::vlanCMMIPv6SubnetRoute3
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2.3.51.2.4.9.1.20.20.1.95.1 snmpget -v2c -c public <target> CME-MIB::vlanCMMIPv6SubnetRoute3.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.2.3.51.2.4.9.1.20.20.1.95.1 s <value>
Start monitoring Cisco Communications Manager Express (CME) router/gateway with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CME-MIB::vlanCMMIPv6SubnetRoute3 OID value, configure state conditions and alerts, and monitor any Cisco Communications Manager Express (CME) router/gateway from a single console.
OID Breakdown
Upper-level ancestors (13 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2 | ibm | BLADE-MIB |
| 1.3.6.1.4.1.2.3 | ibmAgents | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51 | netfinitySupportProcessorAgent | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2 | bladeCenterSnmpMIB | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2.4 | configureSP | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2.4.9 | networkConfiguration | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2.4.9.1 | networkInterfaces | BLADE-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2.3.51.2.4.9.1.20 | vlanConfigure | CME-MIB |
| 1.3.6.1.4.1.2.3.51.2.4.9.1.20.20 | vlanCMMTable | CME-MIB |
| 1.3.6.1.4.1.2.3.51.2.4.9.1.20.20.1 | vlanCMMEntry | CME-MIB |
| 1.3.6.1.4.1.2.3.51.2.4.9.1.20.20.1.95 | vlanCMMIPv6SubnetRoute3 | CME-MIB |