All MIBs › CME-MIB › vlanCMMIPv6SubnetRoute2
vlanCMMIPv6SubnetRoute2
Module: CME-MIB
OID (symbolic): CME-MIB::vlanCMMIPv6SubnetRoute2
OID (numeric): 1.3.6.1.4.1.2.3.51.2.4.9.1.20.20.1.93
Node type: OBJECT-TYPE
Type: InetAddressIPv6
Access: read-write
Description: This object sets the IPv6 address of the subnet route 2 for this VLAN entry.
The entry with the vlanCMMIndex value of 1 (default VLAN entry) will always have this object set to 0.0.0.0.
For all other VLAN entries, this object may be set to any valid subnet route.
For a change of this object to take effect, the object, vlanCMMState, must be set to enable(1) if the vlanCMMState is currently disable(0), or set to restart(2) if the vlanCMMState is currently enable(1).
What is vlanCMMIPv6SubnetRoute2?
This writable object holds the IPv6 address of a second static subnet route for a VLAN entry, staying all-zero on the default VLAN. It lets an admin add a second independent IPv6 destination reachable from this VLAN when a single route (route 1) doesn't cover every subnet the management network needs to reach. For example, an admin could set route 2 to fd00:30:: for VLAN entry 3 to reach a separate backup-syslog IPv6 subnet, then enable vlanCMMState(1).
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2.3.51.2.4.9.1.20.20.1.93 snmpwalk -v2c -c public <target> CME-MIB::vlanCMMIPv6SubnetRoute2
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2.3.51.2.4.9.1.20.20.1.93.1 snmpget -v2c -c public <target> CME-MIB::vlanCMMIPv6SubnetRoute2.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.2.3.51.2.4.9.1.20.20.1.93.1 s <value>
Start monitoring Cisco Communications Manager Express (CME) router/gateway with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CME-MIB::vlanCMMIPv6SubnetRoute2 OID value, configure state conditions and alerts, and monitor any Cisco Communications Manager Express (CME) router/gateway from a single console.
OID Breakdown
Upper-level ancestors (13 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2 | ibm | BLADE-MIB |
| 1.3.6.1.4.1.2.3 | ibmAgents | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51 | netfinitySupportProcessorAgent | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2 | bladeCenterSnmpMIB | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2.4 | configureSP | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2.4.9 | networkConfiguration | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2.4.9.1 | networkInterfaces | BLADE-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2.3.51.2.4.9.1.20 | vlanConfigure | CME-MIB |
| 1.3.6.1.4.1.2.3.51.2.4.9.1.20.20 | vlanCMMTable | CME-MIB |
| 1.3.6.1.4.1.2.3.51.2.4.9.1.20.20.1 | vlanCMMEntry | CME-MIB |
| 1.3.6.1.4.1.2.3.51.2.4.9.1.20.20.1.93 | vlanCMMIPv6SubnetRoute2 | CME-MIB |