All MIBs › CME-MIB › vlanCMMIPv4SubnetRouteMask2
vlanCMMIPv4SubnetRouteMask2
Module: CME-MIB
OID (symbolic): CME-MIB::vlanCMMIPv4SubnetRouteMask2
OID (numeric): 1.3.6.1.4.1.2.3.51.2.4.9.1.20.20.1.54
Node type: OBJECT-TYPE
Type: IpAddress
Access: read-write
Description: This object sets the IPv4 subnet route mask 2 for this VLAN entry.
The entry with the vlanCMMIndex value of 1 (default VLAN entry) will always have this object set to 0.0.0.0.
For all other VLAN entries, this object may be set to any valid subnet mask.
For a change of this object to take effect, the object, vlanCMMState, must be set to enable(1) if the vlanCMMState is currently disable(0), or set to restart(2) if the vlanCMMState is currently enable(1).
What is vlanCMMIPv4SubnetRouteMask2?
This writable object holds the subnet mask that goes with the second static IPv4 subnet route (vlanCMMIPv4SubnetRoute2) on a VLAN entry, staying 0.0.0.0 for the default VLAN. It matters operationally because a route address without its matching mask is meaningless; the mask defines how much of 172.16.5.0 the MM should treat as local versus routed through that second path. An admin who set the route address to 172.16.5.0 would pair it with a mask of 255.255.255.0 here, then enable vlanCMMState(1) for the pair to take effect.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2.3.51.2.4.9.1.20.20.1.54 snmpwalk -v2c -c public <target> CME-MIB::vlanCMMIPv4SubnetRouteMask2
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2.3.51.2.4.9.1.20.20.1.54.1 snmpget -v2c -c public <target> CME-MIB::vlanCMMIPv4SubnetRouteMask2.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.2.3.51.2.4.9.1.20.20.1.54.1 a <value>
Start monitoring Cisco Communications Manager Express (CME) router/gateway with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CME-MIB::vlanCMMIPv4SubnetRouteMask2 OID value, configure state conditions and alerts, and monitor any Cisco Communications Manager Express (CME) router/gateway from a single console.
OID Breakdown
Upper-level ancestors (13 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2 | ibm | BLADE-MIB |
| 1.3.6.1.4.1.2.3 | ibmAgents | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51 | netfinitySupportProcessorAgent | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2 | bladeCenterSnmpMIB | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2.4 | configureSP | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2.4.9 | networkConfiguration | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2.4.9.1 | networkInterfaces | BLADE-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2.3.51.2.4.9.1.20 | vlanConfigure | CME-MIB |
| 1.3.6.1.4.1.2.3.51.2.4.9.1.20.20 | vlanCMMTable | CME-MIB |
| 1.3.6.1.4.1.2.3.51.2.4.9.1.20.20.1 | vlanCMMEntry | CME-MIB |
| 1.3.6.1.4.1.2.3.51.2.4.9.1.20.20.1.54 | vlanCMMIPv4SubnetRouteMask2 | CME-MIB |