All MIBs › CME-MIB › vlanCMMIPv4SubnetRoute3
vlanCMMIPv4SubnetRoute3
Module: CME-MIB
OID (symbolic): CME-MIB::vlanCMMIPv4SubnetRoute3
OID (numeric): 1.3.6.1.4.1.2.3.51.2.4.9.1.20.20.1.55
Node type: OBJECT-TYPE
Type: IpAddress
Access: read-write
Description: This object sets the IPv4 address of the subnet route 3 for this VLAN entry.
The entry with the vlanCMMIndex value of 1 (default VLAN entry) will always have this object set to 0.0.0.0.
For all other VLAN entries, this object may be set to any valid subnet route.
For a change of this object to take effect, the object, vlanCMMState, must be set to enable(1) if the vlanCMMState is currently disable(0), or set to restart(2) if the vlanCMMState is currently enable(1).
What is vlanCMMIPv4SubnetRoute3?
This writable object stores the IPv4 address of a third static subnet route for a VLAN entry, again fixed at 0.0.0.0 for the default VLAN. It lets an admin configure a third distinct destination network reachable through this VLAN when two routes already in use (routes 1 and 2) aren't enough to cover every subnet the management traffic needs. For instance, an admin managing VLAN 5 might use route 3 to add a path to a separate 10.0.9.0 backup-monitoring subnet, then set vlanCMMState to enable(1).
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2.3.51.2.4.9.1.20.20.1.55 snmpwalk -v2c -c public <target> CME-MIB::vlanCMMIPv4SubnetRoute3
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2.3.51.2.4.9.1.20.20.1.55.1 snmpget -v2c -c public <target> CME-MIB::vlanCMMIPv4SubnetRoute3.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.2.3.51.2.4.9.1.20.20.1.55.1 a <value>
Start monitoring Cisco Communications Manager Express (CME) router/gateway with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CME-MIB::vlanCMMIPv4SubnetRoute3 OID value, configure state conditions and alerts, and monitor any Cisco Communications Manager Express (CME) router/gateway from a single console.
OID Breakdown
Upper-level ancestors (13 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2 | ibm | BLADE-MIB |
| 1.3.6.1.4.1.2.3 | ibmAgents | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51 | netfinitySupportProcessorAgent | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2 | bladeCenterSnmpMIB | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2.4 | configureSP | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2.4.9 | networkConfiguration | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2.4.9.1 | networkInterfaces | BLADE-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2.3.51.2.4.9.1.20 | vlanConfigure | CME-MIB |
| 1.3.6.1.4.1.2.3.51.2.4.9.1.20.20 | vlanCMMTable | CME-MIB |
| 1.3.6.1.4.1.2.3.51.2.4.9.1.20.20.1 | vlanCMMEntry | CME-MIB |
| 1.3.6.1.4.1.2.3.51.2.4.9.1.20.20.1.55 | vlanCMMIPv4SubnetRoute3 | CME-MIB |