All MIBs › CME-MIB › vlanCMMIPv4SubnetRoute1
vlanCMMIPv4SubnetRoute1
Module: CME-MIB
OID (symbolic): CME-MIB::vlanCMMIPv4SubnetRoute1
OID (numeric): 1.3.6.1.4.1.2.3.51.2.4.9.1.20.20.1.51
Node type: OBJECT-TYPE
Type: IpAddress
Access: read-write
Description: This object sets the IPv4 address of the subnet route 1 for this VLAN entry.
The entry with the vlanCMMIndex value of 1 (default VLAN entry) will always have this object set to 0.0.0.0.
For all other VLAN entries, this object may be set to any valid subnet route.
For a change of this object to take effect, the object, vlanCMMState, must be set to enable(1) if the vlanCMMState is currently disable(0), or set to restart(2) if the vlanCMMState is currently enable(1).
What is vlanCMMIPv4SubnetRoute1?
This read-write object sets the IPv4 address for subnet route 1 on a VLAN entry, where the default VLAN entry (index 1) is always fixed at 0.0.0.0, while other VLAN entries may be set to any valid subnet route, and the change requires vlanCMMState to be set to enable for it to take effect. An administrator configures this to add an extra static route reachable from a non-default VLAN entry. For example, an admin sets this subnet route on a non-default VLAN entry to reach a secondary management subnet, then sets vlanCMMState to enable for the route to actually take effect.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2.3.51.2.4.9.1.20.20.1.51 snmpwalk -v2c -c public <target> CME-MIB::vlanCMMIPv4SubnetRoute1
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2.3.51.2.4.9.1.20.20.1.51.1 snmpget -v2c -c public <target> CME-MIB::vlanCMMIPv4SubnetRoute1.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.2.3.51.2.4.9.1.20.20.1.51.1 a <value>
Start monitoring Cisco Communications Manager Express (CME) router/gateway with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CME-MIB::vlanCMMIPv4SubnetRoute1 OID value, configure state conditions and alerts, and monitor any Cisco Communications Manager Express (CME) router/gateway from a single console.
OID Breakdown
Upper-level ancestors (13 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2 | ibm | BLADE-MIB |
| 1.3.6.1.4.1.2.3 | ibmAgents | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51 | netfinitySupportProcessorAgent | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2 | bladeCenterSnmpMIB | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2.4 | configureSP | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2.4.9 | networkConfiguration | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2.4.9.1 | networkInterfaces | BLADE-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2.3.51.2.4.9.1.20 | vlanConfigure | CME-MIB |
| 1.3.6.1.4.1.2.3.51.2.4.9.1.20.20 | vlanCMMTable | CME-MIB |
| 1.3.6.1.4.1.2.3.51.2.4.9.1.20.20.1 | vlanCMMEntry | CME-MIB |
| 1.3.6.1.4.1.2.3.51.2.4.9.1.20.20.1.51 | vlanCMMIPv4SubnetRoute1 | CME-MIB |