All MIBs › CME-MIB › vlanCMMIPv4Gateway
vlanCMMIPv4Gateway
Module: CME-MIB
OID (symbolic): CME-MIB::vlanCMMIPv4Gateway
OID (numeric): 1.3.6.1.4.1.2.3.51.2.4.9.1.20.20.1.32
Node type: OBJECT-TYPE
Type: IpAddress
Access: read-write
Description: This object sets the IPv4 address for the IP gateway for this VLAN entry.
The entry with the vlanCMMIndex value of 1 (default VLAN entry) will have this object set to the IP gateway for the ethernet interface. The IP address of the default VLAN entry can only change by changing the IP gateway of the ethernet interface.
For all other VLAN entries, this object may be set to any IP address except the IP address of the ethernet interface.
For a change of this object to take effect, the object, vlanCMMState, must be set to enable(1) if the vlanCMMState is currently disable(0), or set to restart(2) if the vlanCMMState is currently enable(1).
What is vlanCMMIPv4Gateway?
This read-write object sets the IPv4 gateway address for a VLAN entry, where the default VLAN entry (index 1) always mirrors the chassis ethernet interface's own gateway and can only be changed by changing that interface's gateway, while other VLAN entries may be set independently. An administrator configures this to give a non-default VLAN entry its own routing gateway distinct from the chassis's primary interface gateway. For example, an admin sets a different gateway address on a non-default VLAN entry so that VLAN's traffic routes through a separate router from the chassis's main management gateway.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2.3.51.2.4.9.1.20.20.1.32 snmpwalk -v2c -c public <target> CME-MIB::vlanCMMIPv4Gateway
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2.3.51.2.4.9.1.20.20.1.32.1 snmpget -v2c -c public <target> CME-MIB::vlanCMMIPv4Gateway.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.2.3.51.2.4.9.1.20.20.1.32.1 a <value>
Start monitoring Cisco Communications Manager Express (CME) router/gateway with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CME-MIB::vlanCMMIPv4Gateway OID value, configure state conditions and alerts, and monitor any Cisco Communications Manager Express (CME) router/gateway from a single console.
OID Breakdown
Upper-level ancestors (13 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2 | ibm | BLADE-MIB |
| 1.3.6.1.4.1.2.3 | ibmAgents | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51 | netfinitySupportProcessorAgent | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2 | bladeCenterSnmpMIB | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2.4 | configureSP | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2.4.9 | networkConfiguration | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2.4.9.1 | networkInterfaces | BLADE-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2.3.51.2.4.9.1.20 | vlanConfigure | CME-MIB |
| 1.3.6.1.4.1.2.3.51.2.4.9.1.20.20 | vlanCMMTable | CME-MIB |
| 1.3.6.1.4.1.2.3.51.2.4.9.1.20.20.1 | vlanCMMEntry | CME-MIB |
| 1.3.6.1.4.1.2.3.51.2.4.9.1.20.20.1.32 | vlanCMMIPv4Gateway | CME-MIB |