All MIBs › CME-MIB › temperatureSensor9WarningReset
temperatureSensor9WarningReset
Module: CME-MIB
OID (symbolic): CME-MIB::temperatureSensor9WarningReset
OID (numeric): 1.3.6.1.4.1.2.3.51.2.22.1.5.4.1.48
Node type: OBJECT-TYPE
Type: OCTET STRING
Access: read-only
Description: The blade hard shutdown temperature for IPMI blades in degrees centigrade(C). An octet string expressed as 'sddd.dd Centigrade' where: s is the sign ('-' for negative or blank space for positive) d is a decimal digit or blank space for leading zeroes. The string 'Not Readable!' indicates that the given monitor is not supported on this system. The string 'No Temperature' indicates that the given monitor does not exist on this system or is powered off.
What is temperatureSensor9WarningReset?
This read-only octet string reports the hysteresis temperature at which sensor 9's warning condition clears, completing the warning/reset threshold pair for the third numbered sensor. It serves the same anti-flapping purpose as the reset thresholds for sensors 7 and 8, but tuned to sensor 9's own thermal zone. An admin's monitoring dashboard would only mark sensor 9's warning as resolved once bladeSensor9Temp drops below temperatureSensor9WarningReset.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2.3.51.2.22.1.5.4.1.48 snmpwalk -v2c -c public <target> CME-MIB::temperatureSensor9WarningReset
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2.3.51.2.22.1.5.4.1.48.1 snmpget -v2c -c public <target> CME-MIB::temperatureSensor9WarningReset.1
Start monitoring Cisco Communications Manager Express (CME) router/gateway with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CME-MIB::temperatureSensor9WarningReset OID value, configure state conditions and alerts, and monitor any Cisco Communications Manager Express (CME) router/gateway from a single console.
OID Breakdown
Upper-level ancestors (15 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2 | ibm | BLADE-MIB |
| 1.3.6.1.4.1.2.3 | ibmAgents | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51 | netfinitySupportProcessorAgent | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2 | bladeCenterSnmpMIB | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2.22 | bladeCenter | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2.22.1 | processorBlade | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2.22.1.5 | bladeMonitors | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.4 | bladeTemperatureThresholdsTable | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.4.1 | bladeTemperatureThresholdsEntry | BLADE-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2.3.51.2.22.1.5.4.1.48 | temperatureSensor9WarningReset | CME-MIB |