All MIBs › CME-MIB › temperatureSensor9Warning
temperatureSensor9Warning
Module: CME-MIB
OID (symbolic): CME-MIB::temperatureSensor9Warning
OID (numeric): 1.3.6.1.4.1.2.3.51.2.22.1.5.4.1.47
Node type: OBJECT-TYPE
Type: OCTET STRING
Access: read-only
Description: The blade hard shutdown temperature for IPMI blades in degrees centigrade(C). An octet string expressed as 'sddd.dd Centigrade' where: s is the sign ('-' for negative or blank space for positive) d is a decimal digit or blank space for leading zeroes. The string 'Not Readable!' indicates that the given monitor is not supported on this system. The string 'No Temperature' indicates that the given monitor does not exist on this system or is powered off.
What is temperatureSensor9Warning?
This read-only octet string reports the warning threshold for sensor 9, giving an early alert trip point distinct from sensors 7 and 8 for that particular thermal zone on the blade. It matters because a blade could have one sensor running fine while another runs hot, so monitoring each sensor's own warning threshold separately catches localized problems a single averaged reading would miss. An admin would compare bladeSensor9Temp specifically against temperatureSensor9Warning, not against sensor 7 or 8's warning values, to evaluate that zone.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2.3.51.2.22.1.5.4.1.47 snmpwalk -v2c -c public <target> CME-MIB::temperatureSensor9Warning
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2.3.51.2.22.1.5.4.1.47.1 snmpget -v2c -c public <target> CME-MIB::temperatureSensor9Warning.1
Start monitoring Cisco Communications Manager Express (CME) router/gateway with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CME-MIB::temperatureSensor9Warning OID value, configure state conditions and alerts, and monitor any Cisco Communications Manager Express (CME) router/gateway from a single console.
OID Breakdown
Upper-level ancestors (15 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2 | ibm | BLADE-MIB |
| 1.3.6.1.4.1.2.3 | ibmAgents | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51 | netfinitySupportProcessorAgent | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2 | bladeCenterSnmpMIB | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2.22 | bladeCenter | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2.22.1 | processorBlade | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2.22.1.5 | bladeMonitors | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.4 | bladeTemperatureThresholdsTable | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.4.1 | bladeTemperatureThresholdsEntry | BLADE-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2.3.51.2.22.1.5.4.1.47 | temperatureSensor9Warning | CME-MIB |