All MIBs › CME-MIB › temperatureSensor8WarningReset
temperatureSensor8WarningReset
Module: CME-MIB
OID (symbolic): CME-MIB::temperatureSensor8WarningReset
OID (numeric): 1.3.6.1.4.1.2.3.51.2.22.1.5.4.1.45
Node type: OBJECT-TYPE
Type: OCTET STRING
Access: read-only
Description: The blade hard shutdown temperature for IPMI blades in degrees centigrade(C). An octet string expressed as 'sddd.dd Centigrade' where: s is the sign ('-' for negative or blank space for positive) d is a decimal digit or blank space for leading zeroes. The string 'Not Readable!' indicates that the given monitor is not supported on this system. The string 'No Temperature' indicates that the given monitor does not exist on this system or is powered off.
What is temperatureSensor8WarningReset?
This read-only octet string reports the hysteresis temperature at which sensor 8's warning condition is considered cleared. Like sensor 7's reset value, it prevents alert flapping specific to sensor 8's own thermal zone, which may run warmer or cooler than sensor 7's location and so needs its own reset point. An admin's alert-clearing logic for sensor 8 would wait for bladeSensor8Temp to fall below temperatureSensor8WarningReset before marking that sensor's warning resolved.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2.3.51.2.22.1.5.4.1.45 snmpwalk -v2c -c public <target> CME-MIB::temperatureSensor8WarningReset
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2.3.51.2.22.1.5.4.1.45.1 snmpget -v2c -c public <target> CME-MIB::temperatureSensor8WarningReset.1
Start monitoring Cisco Communications Manager Express (CME) router/gateway with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CME-MIB::temperatureSensor8WarningReset OID value, configure state conditions and alerts, and monitor any Cisco Communications Manager Express (CME) router/gateway from a single console.
OID Breakdown
Upper-level ancestors (15 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2 | ibm | BLADE-MIB |
| 1.3.6.1.4.1.2.3 | ibmAgents | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51 | netfinitySupportProcessorAgent | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2 | bladeCenterSnmpMIB | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2.22 | bladeCenter | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2.22.1 | processorBlade | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2.22.1.5 | bladeMonitors | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.4 | bladeTemperatureThresholdsTable | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.4.1 | bladeTemperatureThresholdsEntry | BLADE-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2.3.51.2.22.1.5.4.1.45 | temperatureSensor8WarningReset | CME-MIB |