All MIBs › CME-MIB › temperatureSensor8Warning
temperatureSensor8Warning
Module: CME-MIB
OID (symbolic): CME-MIB::temperatureSensor8Warning
OID (numeric): 1.3.6.1.4.1.2.3.51.2.22.1.5.4.1.44
Node type: OBJECT-TYPE
Type: OCTET STRING
Access: read-only
Description: The blade hard shutdown temperature for IPMI blades in degrees centigrade(C). An octet string expressed as 'sddd.dd Centigrade' where: s is the sign ('-' for negative or blank space for positive) d is a decimal digit or blank space for leading zeroes. The string 'Not Readable!' indicates that the given monitor is not supported on this system. The string 'No Temperature' indicates that the given monitor does not exist on this system or is powered off.
What is temperatureSensor8Warning?
This read-only octet string reports the warning threshold for sensor 8, distinct from sensor 7's warning threshold since the two sensors may sit in different thermal zones on the blade. It's the early-warning trip point an admin's monitoring should watch for that particular sensor before it escalates to temperatureSensor8HardShutdown. An admin setting per-sensor alert thresholds would configure a separate rule comparing bladeSensor8Temp against temperatureSensor8Warning, rather than reusing sensor 7's threshold value.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2.3.51.2.22.1.5.4.1.44 snmpwalk -v2c -c public <target> CME-MIB::temperatureSensor8Warning
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2.3.51.2.22.1.5.4.1.44.1 snmpget -v2c -c public <target> CME-MIB::temperatureSensor8Warning.1
Start monitoring Cisco Communications Manager Express (CME) router/gateway with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CME-MIB::temperatureSensor8Warning OID value, configure state conditions and alerts, and monitor any Cisco Communications Manager Express (CME) router/gateway from a single console.
OID Breakdown
Upper-level ancestors (15 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2 | ibm | BLADE-MIB |
| 1.3.6.1.4.1.2.3 | ibmAgents | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51 | netfinitySupportProcessorAgent | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2 | bladeCenterSnmpMIB | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2.22 | bladeCenter | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2.22.1 | processorBlade | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2.22.1.5 | bladeMonitors | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.4 | bladeTemperatureThresholdsTable | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.4.1 | bladeTemperatureThresholdsEntry | BLADE-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2.3.51.2.22.1.5.4.1.44 | temperatureSensor8Warning | CME-MIB |