All MIBs › CME-MIB › temperatureSensor7Warning
temperatureSensor7Warning
Module: CME-MIB
OID (symbolic): CME-MIB::temperatureSensor7Warning
OID (numeric): 1.3.6.1.4.1.2.3.51.2.22.1.5.4.1.41
Node type: OBJECT-TYPE
Type: OCTET STRING
Access: read-only
Description: The blade hard shutdown temperature for IPMI blades in degrees centigrade(C). An octet string expressed as 'sddd.dd Centigrade' where: s is the sign ('-' for negative or blank space for positive) d is a decimal digit or blank space for leading zeroes. The string 'Not Readable!' indicates that the given monitor is not supported on this system. The string 'No Temperature' indicates that the given monitor does not exist on this system or is powered off.
What is temperatureSensor7Warning?
This read-only octet string reports the warning temperature threshold for IPMI blade sensor 7, in the same 'sddd.dd Centigrade' format used throughout this sensor group. Crossing this threshold is meant to give an admin advance notice before the blade reaches the more severe temperatureSensor7HardShutdown level, making it the earlier trip point worth alerting on. An admin wanting a proactive cooling-fault alert would watch for bladeSensor7Temp exceeding temperatureSensor7Warning rather than waiting for a hard shutdown.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2.3.51.2.22.1.5.4.1.41 snmpwalk -v2c -c public <target> CME-MIB::temperatureSensor7Warning
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2.3.51.2.22.1.5.4.1.41.1 snmpget -v2c -c public <target> CME-MIB::temperatureSensor7Warning.1
Start monitoring Cisco Communications Manager Express (CME) router/gateway with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CME-MIB::temperatureSensor7Warning OID value, configure state conditions and alerts, and monitor any Cisco Communications Manager Express (CME) router/gateway from a single console.
OID Breakdown
Upper-level ancestors (15 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2 | ibm | BLADE-MIB |
| 1.3.6.1.4.1.2.3 | ibmAgents | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51 | netfinitySupportProcessorAgent | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2 | bladeCenterSnmpMIB | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2.22 | bladeCenter | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2.22.1 | processorBlade | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2.22.1.5 | bladeMonitors | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.4 | bladeTemperatureThresholdsTable | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.4.1 | bladeTemperatureThresholdsEntry | BLADE-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2.3.51.2.22.1.5.4.1.41 | temperatureSensor7Warning | CME-MIB |