All MIBs › CME-MIB › standbyExtEthernetInterfaceDuplexSetting
standbyExtEthernetInterfaceDuplexSetting
Module: CME-MIB
OID (symbolic): CME-MIB::standbyExtEthernetInterfaceDuplexSetting
OID (numeric): 1.3.6.1.4.1.2.3.51.2.4.9.1.3.6
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Specifies the duplex settings for the data transfer rate to be used over the ethernet interface: Half, Full, or Auto.
NOTE: This MIB object is only applicable to systems with a standby MM.
What is standbyExtEthernetInterfaceDuplexSetting?
This read-write enumerated object sets the duplex mode for the standby management module's ethernet interface, choosing full, half, or auto duplex, applicable only to chassis with an installed standby MM. An administrator sets this to eliminate a duplex mismatch that would otherwise cause dropped packets or high error counts on the standby MM's link. For example, an admin forces this to fullDuplex(1) after diagnosing collision errors caused by an auto-duplex mismatch on the standby MM's switch port.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2.3.51.2.4.9.1.3.6 snmpwalk -v2c -c public <target> CME-MIB::standbyExtEthernetInterfaceDuplexSetting
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2.3.51.2.4.9.1.3.6.1 snmpget -v2c -c public <target> CME-MIB::standbyExtEthernetInterfaceDuplexSetting.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.2.3.51.2.4.9.1.3.6.1 i <value>
Start monitoring Cisco Communications Manager Express (CME) router/gateway with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CME-MIB::standbyExtEthernetInterfaceDuplexSetting OID value, configure state conditions and alerts, and monitor any Cisco Communications Manager Express (CME) router/gateway from a single console.
OID Breakdown
Upper-level ancestors (13 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2 | ibm | BLADE-MIB |
| 1.3.6.1.4.1.2.3 | ibmAgents | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51 | netfinitySupportProcessorAgent | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2 | bladeCenterSnmpMIB | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2.4 | configureSP | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2.4.9 | networkConfiguration | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2.4.9.1 | networkInterfaces | BLADE-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2.3.51.2.4.9.1.3 | standbyExtEthernetInterface | CME-MIB |
| 1.3.6.1.4.1.2.3.51.2.4.9.1.3.6 | standbyExtEthernetInterfaceDuplexSetting | CME-MIB |