All MIBs › CME-MIB › standbyExtEthernetInterfaceDataRate
standbyExtEthernetInterfaceDataRate
Module: CME-MIB
OID (symbolic): CME-MIB::standbyExtEthernetInterfaceDataRate
OID (numeric): 1.3.6.1.4.1.2.3.51.2.4.9.1.3.5
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Specifies the data transfer rate to be used over the ethernet interface: 10Mb, 100Mb, 1G or Auto.
NOTE: This MIB object is only applicable to systems with a standby MM.
What is standbyExtEthernetInterfaceDataRate?
This read-write enumerated object sets the ethernet data rate for the standby management module's interface, choosing between 10Mb, 100Mb, 1Gb, or auto-negotiated speed, applicable only to chassis with an installed standby MM. An administrator sets this to match the standby MM's link speed to the switch port it's connected to, avoiding a speed mismatch. For example, an admin sets this to enet1Gigabit(6) to match the standby MM's uplink to a gigabit switch port after noticing it had negotiated a slower fallback speed.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2.3.51.2.4.9.1.3.5 snmpwalk -v2c -c public <target> CME-MIB::standbyExtEthernetInterfaceDataRate
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2.3.51.2.4.9.1.3.5.1 snmpget -v2c -c public <target> CME-MIB::standbyExtEthernetInterfaceDataRate.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.2.3.51.2.4.9.1.3.5.1 i <value>
Start monitoring Cisco Communications Manager Express (CME) router/gateway with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CME-MIB::standbyExtEthernetInterfaceDataRate OID value, configure state conditions and alerts, and monitor any Cisco Communications Manager Express (CME) router/gateway from a single console.
OID Breakdown
Upper-level ancestors (13 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2 | ibm | BLADE-MIB |
| 1.3.6.1.4.1.2.3 | ibmAgents | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51 | netfinitySupportProcessorAgent | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2 | bladeCenterSnmpMIB | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2.4 | configureSP | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2.4.9 | networkConfiguration | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2.4.9.1 | networkInterfaces | BLADE-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2.3.51.2.4.9.1.3 | standbyExtEthernetInterface | CME-MIB |
| 1.3.6.1.4.1.2.3.51.2.4.9.1.3.5 | standbyExtEthernetInterfaceDataRate | CME-MIB |