All MIBs › CME-MIB › sshEnable
sshEnable
Module: CME-MIB
OID (symbolic): CME-MIB::sshEnable
OID (numeric): 1.3.6.1.4.1.2.3.51.2.4.9.3.4.10
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Disable/Enable SSH.
What is sshEnable?
This writable enum enables or disables the SSH command-line service on the MM. It's the encrypted alternative to Telnet for administrators who need remote CLI access to the management module, so disabling it without first confirming another access path (like the web interface) could lock out CLI administration. An admin standardizing all chassis on SSH-only access would set sshEnable to enabled(1) and telnetEnable to disabled(0) together.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2.3.51.2.4.9.3.4.10 snmpwalk -v2c -c public <target> CME-MIB::sshEnable
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2.3.51.2.4.9.3.4.10.1 snmpget -v2c -c public <target> CME-MIB::sshEnable.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.2.3.51.2.4.9.3.4.10.1 i <value>
Start monitoring Cisco Communications Manager Express (CME) router/gateway with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CME-MIB::sshEnable OID value, configure state conditions and alerts, and monitor any Cisco Communications Manager Express (CME) router/gateway from a single console.
OID Breakdown
Upper-level ancestors (14 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2 | ibm | BLADE-MIB |
| 1.3.6.1.4.1.2.3 | ibmAgents | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51 | netfinitySupportProcessorAgent | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2 | bladeCenterSnmpMIB | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2.4 | configureSP | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2.4.9 | networkConfiguration | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2.4.9.3 | tcpProtocols | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.4 | tcpApplicationConfig | BLADE-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2.3.51.2.4.9.3.4.10 | sshEnable | CME-MIB |