All MIBs › CME-MIB › smPowerServiceResetCmd
smPowerServiceResetCmd
Module: CME-MIB
OID (symbolic): CME-MIB::smPowerServiceResetCmd
OID (numeric): 1.3.6.1.4.1.2.3.51.2.23.10.2.1.4
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: To reset the auxiliary power on a switch component, set this object to resetVirtualReseatOperation(1). This will toggle the auxiliary power to the switch and simulate a physical removal and insertion. During the operation, auxiliary power is removed from the component and is then restored. For IOMs, the power state will be on after the operation completes.
To perform a hard restart on the switch component, set this object to resetHardRestartOperation(2). This will toggle the reset line to the service processor causing it to re-initialize. The service processor on the component is directly reset, but the power state of the component will not be affected by this operation.
This object is intended to be write-only.
The component will experience a temporary loss of communication and the power state will change. Prior to executing this action, perform any operations needed to protect user data.
Reading this object will always return the value of noOperation(0).
What is smPowerServiceResetCmd?
This object lets an admin remotely toggle a switch module's auxiliary power to simulate a physical removal and reinsertion, restoring power afterward so I/O modules come back on, or perform a hard restart instead. An admin trying to recover a hung switch module without physically reseating it uses this object to trigger the operation remotely. For example, an admin would set this to resetVirtualReseatOperation on a switch module that stopped responding to management traffic, expecting the module to come back powered on afterward.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2.3.51.2.23.10.2.1.4 snmpwalk -v2c -c public <target> CME-MIB::smPowerServiceResetCmd
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2.3.51.2.23.10.2.1.4.1 snmpget -v2c -c public <target> CME-MIB::smPowerServiceResetCmd.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.2.3.51.2.23.10.2.1.4.1 i <value>
Start monitoring Cisco Communications Manager Express (CME) router/gateway with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CME-MIB::smPowerServiceResetCmd OID value, configure state conditions and alerts, and monitor any Cisco Communications Manager Express (CME) router/gateway from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2 | ibm | BLADE-MIB |
| 1.3.6.1.4.1.2.3 | ibmAgents | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51 | netfinitySupportProcessorAgent | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2 | bladeCenterSnmpMIB | BLADE-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2.3.51.2.23 | service | CME-MIB |
| 1.3.6.1.4.1.2.3.51.2.23.10 | componentPowerServiceReset | CME-MIB |
| 1.3.6.1.4.1.2.3.51.2.23.10.2 | smPowerServiceResetTable | CME-MIB |
| 1.3.6.1.4.1.2.3.51.2.23.10.2.1 | smPowerServiceResetEntry | CME-MIB |
| 1.3.6.1.4.1.2.3.51.2.23.10.2.1.4 | smPowerServiceResetCmd | CME-MIB |