All MIBs › CME-MIB › smIPv6StaticAddressDefaultRoute
smIPv6StaticAddressDefaultRoute
Module: CME-MIB
OID (symbolic): CME-MIB::smIPv6StaticAddressDefaultRoute
OID (numeric): 1.3.6.1.4.1.2.3.51.2.22.3.2.1.4.3.1.4
Node type: OBJECT-TYPE
Type: InetAddressIPv6
Access: read-write
Description: The default route used for the given address
NOTE: If changing with smIPv6StaticAddressPrefixLen and/or smIPv6StaticAddress sending the update as a single SET command(in one PDU) will minimize the potential downtime of the target switch.
NOTE: Sets on this object can take a few seconds. You may need to update your SNMP timeout when modifying this setting.
What is smIPv6StaticAddressDefaultRoute?
This read-write object defines the default gateway IPv6 address to use with the switch module's static address configuration. Admins set it so the module knows where to send IPv6 traffic destined outside its local subnet, and the description warns to change it together with the static address and prefix length in one PDU. For example, when re-homing a module to a new IPv6 gateway, an admin updates this object in the same SET as smIPv6StaticAddress to avoid a brief loss of management reachability.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2.3.51.2.22.3.2.1.4.3.1.4 snmpwalk -v2c -c public <target> CME-MIB::smIPv6StaticAddressDefaultRoute
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2.3.51.2.22.3.2.1.4.3.1.4.1 snmpget -v2c -c public <target> CME-MIB::smIPv6StaticAddressDefaultRoute.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.2.3.51.2.22.3.2.1.4.3.1.4.1 s <value>
Start monitoring Cisco Communications Manager Express (CME) router/gateway with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CME-MIB::smIPv6StaticAddressDefaultRoute OID value, configure state conditions and alerts, and monitor any Cisco Communications Manager Express (CME) router/gateway from a single console.
OID Breakdown
Upper-level ancestors (14 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2 | ibm | BLADE-MIB |
| 1.3.6.1.4.1.2.3 | ibmAgents | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51 | netfinitySupportProcessorAgent | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2 | bladeCenterSnmpMIB | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2.22 | bladeCenter | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2.22.3 | switchModule | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2.22.3.2 | switchModuleConfig | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1 | switchMgmtNetworkCfg | BLADE-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1.4 | switchIPv6Config | CME-MIB |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1.4.3 | smIPv6StaticConfigTable | CME-MIB |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1.4.3.1 | smIPv6StaticConfigEntry | CME-MIB |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1.4.3.1.4 | smIPv6StaticAddressDefaultRoute | CME-MIB |