All MIBs › CME-MIB › smIPv6StaticAddress
smIPv6StaticAddress
Module: CME-MIB
OID (symbolic): CME-MIB::smIPv6StaticAddress
OID (numeric): 1.3.6.1.4.1.2.3.51.2.22.3.2.1.4.3.1.2
Node type: OBJECT-TYPE
Type: InetAddressIPv6
Access: read-write
Description: The assigned IPv6 address.
NOTE: If changing with smIPv6StaticAddressPrefixLen and/or smIPv6StaticAddressDefaultRoute sending the update as a single SET command(in one PDU) will minimize the potential downtime of the target switch.
NOTE: Sets on this object can take a few seconds. You may need to update your SNMP timeout when modifying this setting.
What is smIPv6StaticAddress?
This read-write object lets an admin manually assign a static IPv6 address to the switch module, overriding DHCPv6 or auto-configuration. Because a bad address change can disrupt management connectivity, the description recommends bundling it with the prefix length and default route in a single SNMP SET and allowing extra time for the change to apply. For example, an admin migrating a module to a new IPv6 numbering plan sets this object together with smIPv6StaticAddressPrefixLen and smIPv6StaticAddressDefaultRoute in one PDU to avoid a mid-change outage.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2.3.51.2.22.3.2.1.4.3.1.2 snmpwalk -v2c -c public <target> CME-MIB::smIPv6StaticAddress
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2.3.51.2.22.3.2.1.4.3.1.2.1 snmpget -v2c -c public <target> CME-MIB::smIPv6StaticAddress.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.2.3.51.2.22.3.2.1.4.3.1.2.1 s <value>
Start monitoring Cisco Communications Manager Express (CME) router/gateway with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CME-MIB::smIPv6StaticAddress OID value, configure state conditions and alerts, and monitor any Cisco Communications Manager Express (CME) router/gateway from a single console.
OID Breakdown
Upper-level ancestors (14 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2 | ibm | BLADE-MIB |
| 1.3.6.1.4.1.2.3 | ibmAgents | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51 | netfinitySupportProcessorAgent | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2 | bladeCenterSnmpMIB | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2.22 | bladeCenter | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2.22.3 | switchModule | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2.22.3.2 | switchModuleConfig | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1 | switchMgmtNetworkCfg | BLADE-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1.4 | switchIPv6Config | CME-MIB |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1.4.3 | smIPv6StaticConfigTable | CME-MIB |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1.4.3.1 | smIPv6StaticConfigEntry | CME-MIB |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1.4.3.1.2 | smIPv6StaticAddress | CME-MIB |