All MIBs › CME-MIB › serviceDataDumpInitiate
serviceDataDumpInitiate
Module: CME-MIB
OID (symbolic): CME-MIB::serviceDataDumpInitiate
OID (numeric): 1.3.6.1.4.1.2.3.51.2.23.3.1.1.7
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Initiates a type of dump collection to be initiated for the blade.
NOTE: Not all blades support this, please check serviceDataDumpCapabilityMask OID to see if the action is supported on this blade.
When the dump file is created, the node transfers it to the /tftproot/service directory on the CMM. Only one file can be moved to this directory at a time, so please use the fileManagement MIB information to check if the file has been completed.
NOTE: Value returned for the GET command is meaningless for this MIB object.
What is serviceDataDumpInitiate?
This object triggers a processor, platform, partition, or service-data dump collection for a specific blade, noting that not all blades support every dump type and that the resulting file is transferred to the CMM's tftproot/service directory one at a time. An admin troubleshooting a crashed or misbehaving blade sets this object to the appropriate dump type to capture diagnostic data for support. For example, an admin would set this to processorDump on a blade that just crashed, then use fileManagement to check when the file has finished moving to the CMM.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2.3.51.2.23.3.1.1.7 snmpwalk -v2c -c public <target> CME-MIB::serviceDataDumpInitiate
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2.3.51.2.23.3.1.1.7.1 snmpget -v2c -c public <target> CME-MIB::serviceDataDumpInitiate.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.2.3.51.2.23.3.1.1.7.1 i <value>
Start monitoring Cisco Communications Manager Express (CME) router/gateway with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CME-MIB::serviceDataDumpInitiate OID value, configure state conditions and alerts, and monitor any Cisco Communications Manager Express (CME) router/gateway from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2 | ibm | BLADE-MIB |
| 1.3.6.1.4.1.2.3 | ibmAgents | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51 | netfinitySupportProcessorAgent | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2 | bladeCenterSnmpMIB | BLADE-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2.3.51.2.23 | service | CME-MIB |
| 1.3.6.1.4.1.2.3.51.2.23.3 | bladeServiceData | CME-MIB |
| 1.3.6.1.4.1.2.3.51.2.23.3.1 | bladeServiceDataTable | CME-MIB |
| 1.3.6.1.4.1.2.3.51.2.23.3.1.1 | bladeServiceDataEntry | CME-MIB |
| 1.3.6.1.4.1.2.3.51.2.23.3.1.1.7 | serviceDataDumpInitiate | CME-MIB |