All MIBs › CME-MIB › rbistSwitchModulesCommunicating
rbistSwitchModulesCommunicating
Module: CME-MIB
OID (symbolic): CME-MIB::rbistSwitchModulesCommunicating
OID (numeric): 1.3.6.1.4.1.2.3.51.2.2.5.3.113
Node type: OBJECT-TYPE
Type: OCTET STRING
Access: read-only
Description: The switch modules that are communicating on the chassis when the standby MM was once primary. The time of the last update can be obtained by querying rbistUpdateTimePrimary object. The switch modules are listed as a bitmap. The bitmap is a string containing a list of 1's and 0's that is as long as the number of switch modules supported. If a switch module was installed and functioning in a bay, a 1 is present in the string in the position representing the bay ID as read from left to right. For example, if switch modules were installed and functioning in bays 1 and 3, and 4 switch modules were supported, the string would look like '1011'.
What is rbistSwitchModulesCommunicating?
This bitmap string records which installed switch modules were communicating at the time this now-standby management module was last primary, with the update time from rbistUpdateTimePrimary. It shows historical switch-module health at that earlier point rather than current status. For example, a switch module marked as not communicating in this snapshot could be the root cause investigated for a chassis network outage from that period.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2.3.51.2.2.5.3.113 snmpwalk -v2c -c public <target> CME-MIB::rbistSwitchModulesCommunicating
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2.3.51.2.2.5.3.113.1 snmpget -v2c -c public <target> CME-MIB::rbistSwitchModulesCommunicating.1
Start monitoring Cisco Communications Manager Express (CME) router/gateway with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CME-MIB::rbistSwitchModulesCommunicating OID value, configure state conditions and alerts, and monitor any Cisco Communications Manager Express (CME) router/gateway from a single console.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2 | ibm | BLADE-MIB |
| 1.3.6.1.4.1.2.3 | ibmAgents | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51 | netfinitySupportProcessorAgent | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2 | bladeCenterSnmpMIB | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2.2 | monitors | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2.2.5 | spStatus | BLADE-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2.3.51.2.2.5.3 | rmmBistAndChassisStatus | CME-MIB |
| 1.3.6.1.4.1.2.3.51.2.2.5.3.113 | rbistSwitchModulesCommunicating | CME-MIB |