All MIBs › CME-MIB › rbistPowerModulesInstalled
rbistPowerModulesInstalled
Module: CME-MIB
OID (symbolic): CME-MIB::rbistPowerModulesInstalled
OID (numeric): 1.3.6.1.4.1.2.3.51.2.2.5.3.81
Node type: OBJECT-TYPE
Type: OCTET STRING
Access: read-only
Description: The power modules that were installed on the chassis when the standby MM was once primary. The time of the last update can be obtained by querying rbistUpdateTimePrimary object. The power modules are listed as a bitmap. The bitmap is a string containing a list of 1's and 0's that is as long as the number of power modules supported. If a power module was installed in a bay, a 1 is present in the string in the position representing the bay ID as read from left to right. For example, if power modules were installed in bays 1 and 3, and 4 power modules were supported, the string would look like '1010'.
What is rbistPowerModulesInstalled?
This bitmap string records which power module bays had a power supply installed at the time this now-standby management module was last primary, with the update time from rbistUpdateTimePrimary, each character position representing one bay. It preserves a historical power-module population snapshot for later comparison. For example, an admin investigating a past power event could check whether a particular power bay was populated at the time this module was last primary.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2.3.51.2.2.5.3.81 snmpwalk -v2c -c public <target> CME-MIB::rbistPowerModulesInstalled
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2.3.51.2.2.5.3.81.1 snmpget -v2c -c public <target> CME-MIB::rbistPowerModulesInstalled.1
Start monitoring Cisco Communications Manager Express (CME) router/gateway with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CME-MIB::rbistPowerModulesInstalled OID value, configure state conditions and alerts, and monitor any Cisco Communications Manager Express (CME) router/gateway from a single console.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2 | ibm | BLADE-MIB |
| 1.3.6.1.4.1.2.3 | ibmAgents | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51 | netfinitySupportProcessorAgent | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2 | bladeCenterSnmpMIB | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2.2 | monitors | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2.2.5 | spStatus | BLADE-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2.3.51.2.2.5.3 | rmmBistAndChassisStatus | CME-MIB |
| 1.3.6.1.4.1.2.3.51.2.2.5.3.81 | rbistPowerModulesInstalled | CME-MIB |