CME-MIB :: rbistBladesInstalled

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCME-MIBrbistBladesInstalled

rbistBladesInstalled

Module: CME-MIB

OID (symbolic): CME-MIB::rbistBladesInstalled

OID (numeric): 1.3.6.1.4.1.2.3.51.2.2.5.3.33

Node type: OBJECT-TYPE

Type: OCTET STRING

Access: read-only

Description: The blades that were installed on the chassis when the standby MM was once primary. The time of the last update can be obtained by querying rbistUpdateTimePrimary object. The blades are listed as a bitmap. The bitmap is a string containing a list of 1's and 0's that is as long as the number of blades supported. If a blade is installed in a bay, a 1 is present in the string in the position representing the bay ID as read from left to right. For example, if blades are installed in bays 1, 5, and 13, and 14 blades are supported, the string would look like '10001000000010'.

What is rbistBladesInstalled?

This bitmap string records which blade bays had a blade physically installed at the time this now-standby management module was last primary, with the test time from rbistUpdateTimePrimary, each character position representing one bay. It preserves a snapshot of chassis population from before the failover for later comparison. For example, an admin could compare this historical bitmap against a current live fan or blade installed-bitmap reading to see if a blade was removed around the time of the failover.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2.3.51.2.2.5.3.33
snmpwalk -v2c -c public <target> CME-MIB::rbistBladesInstalled

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.2.3.51.2.2.5.3.33.1
snmpget -v2c -c public <target> CME-MIB::rbistBladesInstalled.1

Start monitoring Cisco Communications Manager Express (CME) router/gateway with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CME-MIB::rbistBladesInstalled OID value, configure state conditions and alerts, and monitor any Cisco Communications Manager Express (CME) router/gateway from a single console.

OID Breakdown

Upper-level ancestors (12 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.2ibmBLADE-MIB
1.3.6.1.4.1.2.3ibmAgentsBLADE-MIB
1.3.6.1.4.1.2.3.51netfinitySupportProcessorAgentBLADE-MIB
1.3.6.1.4.1.2.3.51.2bladeCenterSnmpMIBBLADE-MIB
1.3.6.1.4.1.2.3.51.2.2monitorsBLADE-MIB
1.3.6.1.4.1.2.3.51.2.2.5spStatusBLADE-MIB
Numeric OIDNameModule
1.3.6.1.4.1.2.3.51.2.2.5.3rmmBistAndChassisStatusCME-MIB
1.3.6.1.4.1.2.3.51.2.2.5.3.33rbistBladesInstalledCME-MIB