All MIBs › CME-MIB › portStopBits
portStopBits
Module: CME-MIB
OID (symbolic): CME-MIB::portStopBits
OID (numeric): 1.3.6.1.4.1.2.3.51.2.4.1.2.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Number of stop bits for the serial port.
What is portStopBits?
This read-write enumerated integer (oneStopbit or twoOrOnePtFive) sets the number of stop bits used by the management module's serial port. Like baud rate and parity, this must match the attached serial terminal's settings for reliable communication over the console cable. For example, if a connected terminal expects one stop bit but portStopBits is set to twoOrOnePtFive(1), console output would appear corrupted.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2.3.51.2.4.1.2.3 snmpwalk -v2c -c public <target> CME-MIB::portStopBits
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2.3.51.2.4.1.2.3.1 snmpget -v2c -c public <target> CME-MIB::portStopBits.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.2.3.51.2.4.1.2.3.1 i <value>
Start monitoring Cisco Communications Manager Express (CME) router/gateway with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CME-MIB::portStopBits OID value, configure state conditions and alerts, and monitor any Cisco Communications Manager Express (CME) router/gateway from a single console.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2 | ibm | BLADE-MIB |
| 1.3.6.1.4.1.2.3 | ibmAgents | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51 | netfinitySupportProcessorAgent | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2 | bladeCenterSnmpMIB | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2.4 | configureSP | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2.4.1 | remoteAccessConfig | BLADE-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2.3.51.2.4.1.2 | serialPortCfg | CME-MIB |
| 1.3.6.1.4.1.2.3.51.2.4.1.2.3 | portStopBits | CME-MIB |