All MIBs › CME-MIB › physicalUplinkCheckDelayInSecs
physicalUplinkCheckDelayInSecs
Module: CME-MIB
OID (symbolic): CME-MIB::physicalUplinkCheckDelayInSecs
OID (numeric): 1.3.6.1.4.1.2.3.51.2.4.9.3.7.6
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Delay, in seconds(10-172800), between discovery of a failed network uplink and the subsequent MM failover for physical detection.
NOTE: This MIB object is only applicable to systems with a standby MM.
What is physicalUplinkCheckDelayInSecs?
This writable integer sets, in seconds from 10 to 172800, the delay between detecting a failed physical network uplink and the MM triggering a failover for physical-link detection, applicable only on standby-MM systems. Because it's measured in seconds rather than the minutes used for logical detection, it lets an admin react much faster to a purely physical cable/link failure than to a logical connectivity failure. An admin wanting near-immediate failover on a hard link-down event might set this to 30 seconds.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2.3.51.2.4.9.3.7.6 snmpwalk -v2c -c public <target> CME-MIB::physicalUplinkCheckDelayInSecs
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2.3.51.2.4.9.3.7.6.1 snmpget -v2c -c public <target> CME-MIB::physicalUplinkCheckDelayInSecs.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.2.3.51.2.4.9.3.7.6.1 i <value>
Start monitoring Cisco Communications Manager Express (CME) router/gateway with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CME-MIB::physicalUplinkCheckDelayInSecs OID value, configure state conditions and alerts, and monitor any Cisco Communications Manager Express (CME) router/gateway from a single console.
OID Breakdown
Upper-level ancestors (14 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2 | ibm | BLADE-MIB |
| 1.3.6.1.4.1.2.3 | ibmAgents | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51 | netfinitySupportProcessorAgent | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2 | bladeCenterSnmpMIB | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2.4 | configureSP | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2.4.9 | networkConfiguration | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2.4.9.3 | tcpProtocols | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.7 | uplinkCheckConfig | BLADE-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2.3.51.2.4.9.3.7.6 | physicalUplinkCheckDelayInSecs | CME-MIB |