CME-MIB :: logicalUplinkIPv6Destination

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCME-MIBlogicalUplinkIPv6Destination

logicalUplinkIPv6Destination

Module: CME-MIB

OID (symbolic): CME-MIB::logicalUplinkIPv6Destination

OID (numeric): 1.3.6.1.4.1.2.3.51.2.4.9.3.7.8

Node type: OBJECT-TYPE

Type: InetAddressIPv6

Access: read-write

Description: Destination IP for MM to check its logical link using IPv6. Specify a non-zero IP Address in order to enable logical uplink checking.

NOTE: This MIB object is only applicable to systems with a standby MM.

What is logicalUplinkIPv6Destination?

This writable IPv6 address is the destination the MM pings over IPv6 to check its logical uplink, mirroring logicalUplinkDestination's IPv4 role, and again only applies to systems with a standby MM. It lets a dual-stack environment verify IPv6 reachability specifically, rather than only checking IPv4 connectivity, before deciding whether the network uplink has truly failed. An admin running a dual-stack network would set this to an upstream router's IPv6 address like 2001:db8::1 alongside the existing IPv4 destination.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2.3.51.2.4.9.3.7.8
snmpwalk -v2c -c public <target> CME-MIB::logicalUplinkIPv6Destination

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.2.3.51.2.4.9.3.7.8.1
snmpget -v2c -c public <target> CME-MIB::logicalUplinkIPv6Destination.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.2.3.51.2.4.9.3.7.8.1 s <value>

Start monitoring Cisco Communications Manager Express (CME) router/gateway with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CME-MIB::logicalUplinkIPv6Destination OID value, configure state conditions and alerts, and monitor any Cisco Communications Manager Express (CME) router/gateway from a single console.

OID Breakdown

Upper-level ancestors (14 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.2ibmBLADE-MIB
1.3.6.1.4.1.2.3ibmAgentsBLADE-MIB
1.3.6.1.4.1.2.3.51netfinitySupportProcessorAgentBLADE-MIB
1.3.6.1.4.1.2.3.51.2bladeCenterSnmpMIBBLADE-MIB
1.3.6.1.4.1.2.3.51.2.4configureSPBLADE-MIB
1.3.6.1.4.1.2.3.51.2.4.9networkConfigurationBLADE-MIB
1.3.6.1.4.1.2.3.51.2.4.9.3tcpProtocolsBLADE-MIB
1.3.6.1.4.1.2.3.51.2.4.9.3.7uplinkCheckConfigBLADE-MIB
Numeric OIDNameModule
1.3.6.1.4.1.2.3.51.2.4.9.3.7.8logicalUplinkIPv6DestinationCME-MIB