All MIBs › CME-MIB › logicalUplinkFailoverPolicy
logicalUplinkFailoverPolicy
Module: CME-MIB
OID (symbolic): CME-MIB::logicalUplinkFailoverPolicy
OID (numeric): 1.3.6.1.4.1.2.3.51.2.4.9.3.7.9
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Determines when to failover if both an IPv4 and IPv6 destination have been configured.
If set to 'either' the system will failover if either of the destination's link check fails. If set to 'both' then the IPv4 and IPv6 link checks must fail before a failover will happen.
NOTE: This MIB object is only applicable to systems with a standby MM.
What is logicalUplinkFailoverPolicy?
This writable enum (either or both) decides, when both an IPv4 and an IPv6 logical-uplink destination are configured, whether a failure of just one of them is enough to trigger failover ('either') or both must fail simultaneously ('both'). It matters because in a dual-stack network one protocol failing might just reflect a routing quirk rather than a true uplink outage, so this setting tunes how conservative the failover trigger is. An admin who only trusts a failover decision when both IPv4 and IPv6 checks fail together would set logicalUplinkFailoverPolicy to both(2).
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2.3.51.2.4.9.3.7.9 snmpwalk -v2c -c public <target> CME-MIB::logicalUplinkFailoverPolicy
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2.3.51.2.4.9.3.7.9.1 snmpget -v2c -c public <target> CME-MIB::logicalUplinkFailoverPolicy.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.2.3.51.2.4.9.3.7.9.1 i <value>
Start monitoring Cisco Communications Manager Express (CME) router/gateway with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CME-MIB::logicalUplinkFailoverPolicy OID value, configure state conditions and alerts, and monitor any Cisco Communications Manager Express (CME) router/gateway from a single console.
OID Breakdown
Upper-level ancestors (14 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2 | ibm | BLADE-MIB |
| 1.3.6.1.4.1.2.3 | ibmAgents | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51 | netfinitySupportProcessorAgent | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2 | bladeCenterSnmpMIB | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2.4 | configureSP | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2.4.9 | networkConfiguration | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2.4.9.3 | tcpProtocols | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.7 | uplinkCheckConfig | BLADE-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2.3.51.2.4.9.3.7.9 | logicalUplinkFailoverPolicy | CME-MIB |