All MIBs › CME-MIB › logicalUplinkCheckEnabled
logicalUplinkCheckEnabled
Module: CME-MIB
OID (symbolic): CME-MIB::logicalUplinkCheckEnabled
OID (numeric): 1.3.6.1.4.1.2.3.51.2.4.9.3.7.4
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Disable or enable network uplink checking for logical detection. logicalUplinkDestination must be set to a non-zero IP Address before enable logical uplink checking.
NOTE: This MIB object is only applicable to systems with a standby MM.
What is logicalUplinkCheckEnabled?
This writable enum turns logical uplink checking on or off, but the description specifies logicalUplinkDestination must already be set to a non-zero address before this can be meaningfully enabled; like the destination object, it only applies to systems with a standby MM. It matters because enabling this without a valid destination configured would leave the failover mechanism effectively non-functional despite appearing enabled. An admin setting up MM redundancy would first configure logicalUplinkDestination, then set logicalUplinkCheckEnabled to uplinkCheckEnabled(1).
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2.3.51.2.4.9.3.7.4 snmpwalk -v2c -c public <target> CME-MIB::logicalUplinkCheckEnabled
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2.3.51.2.4.9.3.7.4.1 snmpget -v2c -c public <target> CME-MIB::logicalUplinkCheckEnabled.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.2.3.51.2.4.9.3.7.4.1 i <value>
Start monitoring Cisco Communications Manager Express (CME) router/gateway with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CME-MIB::logicalUplinkCheckEnabled OID value, configure state conditions and alerts, and monitor any Cisco Communications Manager Express (CME) router/gateway from a single console.
OID Breakdown
Upper-level ancestors (14 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2 | ibm | BLADE-MIB |
| 1.3.6.1.4.1.2.3 | ibmAgents | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51 | netfinitySupportProcessorAgent | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2 | bladeCenterSnmpMIB | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2.4 | configureSP | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2.4.9 | networkConfiguration | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2.4.9.3 | tcpProtocols | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.7 | uplinkCheckConfig | BLADE-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2.3.51.2.4.9.3.7.4 | logicalUplinkCheckEnabled | CME-MIB |