All MIBs › CME-MIB › logicalUplinkCheckDelayInSecs
logicalUplinkCheckDelayInSecs
Module: CME-MIB
OID (symbolic): CME-MIB::logicalUplinkCheckDelayInSecs
OID (numeric): 1.3.6.1.4.1.2.3.51.2.4.9.3.7.7
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Delay, in seconds(60-172800), between discovery of a failed network uplink and the subsequent MM failover for logical detection.
NOTE: This MIB object is only applicable to systems with a standby MM.
What is logicalUplinkCheckDelayInSecs?
This writable integer sets, in seconds from 60 to 172800, the delay between a failed logical uplink check and triggering failover, offering finer-grained control than the minutes-based logicalUplinkCheckDelay object, and again applies only to standby-MM systems. It matters when an admin needs sub-minute-level tuning of logical-failover sensitivity rather than being limited to whole-minute increments. An admin who found the 1-minute minimum of logicalUplinkCheckDelay too coarse could instead set logicalUplinkCheckDelayInSecs to 90 for a 90-second delay.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2.3.51.2.4.9.3.7.7 snmpwalk -v2c -c public <target> CME-MIB::logicalUplinkCheckDelayInSecs
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2.3.51.2.4.9.3.7.7.1 snmpget -v2c -c public <target> CME-MIB::logicalUplinkCheckDelayInSecs.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.2.3.51.2.4.9.3.7.7.1 i <value>
Start monitoring Cisco Communications Manager Express (CME) router/gateway with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CME-MIB::logicalUplinkCheckDelayInSecs OID value, configure state conditions and alerts, and monitor any Cisco Communications Manager Express (CME) router/gateway from a single console.
OID Breakdown
Upper-level ancestors (14 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2 | ibm | BLADE-MIB |
| 1.3.6.1.4.1.2.3 | ibmAgents | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51 | netfinitySupportProcessorAgent | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2 | bladeCenterSnmpMIB | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2.4 | configureSP | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2.4.9 | networkConfiguration | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2.4.9.3 | tcpProtocols | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.7 | uplinkCheckConfig | BLADE-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2.3.51.2.4.9.3.7.7 | logicalUplinkCheckDelayInSecs | CME-MIB |