All MIBs › CME-MIB › ldapAuthCfg
ldapAuthCfg
Module: CME-MIB
OID (symbolic): CME-MIB::ldapAuthCfg
OID (numeric): 1.3.6.1.4.1.2.3.51.2.4.9.3.6.22
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: If ldapAuthCfg is set to 0, LDAP server is used to authenticate and authorize users. If it is set to 1, LDAP server is only used to authenticate users.
Note:LDAP Authentication Only mode is currently supported only in an Active Directory environment.
What is ldapAuthCfg?
This writable enum controls whether the LDAP server is used for both authentication and authorization (0) or for authentication only (1), with 'authentication only' mode documented as supported only in an Active Directory environment. It matters because in authentication-only mode, authorization (what the user is allowed to do on the MM) must come from a source other than LDAP group membership. An admin in a non-Active-Directory LDAP environment (like OpenLDAP) would need to leave this at authenticationAndAuthorization(0) since mode 1 isn't supported there.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2.3.51.2.4.9.3.6.22 snmpwalk -v2c -c public <target> CME-MIB::ldapAuthCfg
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2.3.51.2.4.9.3.6.22.1 snmpget -v2c -c public <target> CME-MIB::ldapAuthCfg.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.2.3.51.2.4.9.3.6.22.1 i <value>
Start monitoring Cisco Communications Manager Express (CME) router/gateway with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CME-MIB::ldapAuthCfg OID value, configure state conditions and alerts, and monitor any Cisco Communications Manager Express (CME) router/gateway from a single console.
OID Breakdown
Upper-level ancestors (14 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2 | ibm | BLADE-MIB |
| 1.3.6.1.4.1.2.3 | ibmAgents | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51 | netfinitySupportProcessorAgent | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2 | bladeCenterSnmpMIB | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2.4 | configureSP | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2.4.9 | networkConfiguration | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2.4.9.3 | tcpProtocols | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.6 | ldapClientCfg | BLADE-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2.3.51.2.4.9.3.6.22 | ldapAuthCfg | CME-MIB |