All MIBs › CME-MIB › hotAirRecircStatusExceeded
hotAirRecircStatusExceeded
Module: CME-MIB
OID (symbolic): CME-MIB::hotAirRecircStatusExceeded
OID (numeric): 1.3.6.1.4.1.2.3.51.2.2.1.9.7.1.7
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: Indicates whether this component has exceeded the threshold of the acceptable temperature being monitored for hot air recirculation.
What is hotAirRecircStatusExceeded?
This flag (no/yes) indicates whether a monitored component's temperature has exceeded the acceptable range being tracked for hot air recirculation. It is the direct alert signal an admin checks to know if recirculation has actually been detected for that component. For example, a value of yes(1) on a particular blade's sensor would prompt the admin to check for blocked airflow or improperly seated blanking panels near that slot.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2.3.51.2.2.1.9.7.1.7 snmpwalk -v2c -c public <target> CME-MIB::hotAirRecircStatusExceeded
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2.3.51.2.2.1.9.7.1.7.1 snmpget -v2c -c public <target> CME-MIB::hotAirRecircStatusExceeded.1
Start monitoring Cisco Communications Manager Express (CME) router/gateway with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CME-MIB::hotAirRecircStatusExceeded OID value, configure state conditions and alerts, and monitor any Cisco Communications Manager Express (CME) router/gateway from a single console.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2 | ibm | BLADE-MIB |
| 1.3.6.1.4.1.2.3 | ibmAgents | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51 | netfinitySupportProcessorAgent | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2 | bladeCenterSnmpMIB | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2.2 | monitors | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2.2.1 | temperature | BLADE-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2.3.51.2.2.1.9 | monitorTemp | CME-MIB |
| 1.3.6.1.4.1.2.3.51.2.2.1.9.7 | hotAirRecircStatusTable | CME-MIB |
| 1.3.6.1.4.1.2.3.51.2.2.1.9.7.1 | hotAirRecircStatusEntry | CME-MIB |
| 1.3.6.1.4.1.2.3.51.2.2.1.9.7.1.7 | hotAirRecircStatusExceeded | CME-MIB |