All MIBs › CME-MIB › groupRBSSwitchModuleConfiguration
groupRBSSwitchModuleConfiguration
Module: CME-MIB
OID (symbolic): CME-MIB::groupRBSSwitchModuleConfiguration
OID (numeric): 1.3.6.1.4.1.2.3.51.2.4.1.7.2.1.15
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Group can modify the I/O Module IP address, configure I/O Module Advanced Management parameters, and restore factory defaults on an I/O Module. Note that a group requires both I/O Module configuration and I/O Module administration roles in order to be able to launch a telnet session to an I/O Module, or to restore factory defaults on an I/O Module.
What is groupRBSSwitchModuleConfiguration?
This read-write integer, disabled(0) or enabled(1), when enabled lets the group modify an I/O module's IP address, configure its Advanced Management parameters, and restore its factory defaults, though launching a telnet session or restoring factory defaults additionally requires the group to also hold switch module administration rights. An admin grants this to a network configuration team, understanding they'll also need administration rights for the most disruptive switch-module actions. For example, a group with only groupRBSSwitchModuleConfiguration enabled could change an I/O module's management IP but couldn't telnet into it without also holding groupRBSSwitchModuleAdministration.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2.3.51.2.4.1.7.2.1.15 snmpwalk -v2c -c public <target> CME-MIB::groupRBSSwitchModuleConfiguration
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2.3.51.2.4.1.7.2.1.15.1 snmpget -v2c -c public <target> CME-MIB::groupRBSSwitchModuleConfiguration.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.2.3.51.2.4.1.7.2.1.15.1 i <value>
Start monitoring Cisco Communications Manager Express (CME) router/gateway with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CME-MIB::groupRBSSwitchModuleConfiguration OID value, configure state conditions and alerts, and monitor any Cisco Communications Manager Express (CME) router/gateway from a single console.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2 | ibm | BLADE-MIB |
| 1.3.6.1.4.1.2.3 | ibmAgents | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51 | netfinitySupportProcessorAgent | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2 | bladeCenterSnmpMIB | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2.4 | configureSP | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2.4.1 | remoteAccessConfig | BLADE-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2.3.51.2.4.1.7 | groupProfiles | CME-MIB |
| 1.3.6.1.4.1.2.3.51.2.4.1.7.2 | groupRBSroleTable | CME-MIB |
| 1.3.6.1.4.1.2.3.51.2.4.1.7.2.1 | groupRBSroleEntry | CME-MIB |
| 1.3.6.1.4.1.2.3.51.2.4.1.7.2.1.15 | groupRBSSwitchModuleConfiguration | CME-MIB |