Description: Contains the fully qualified remote location of the firmware packet file. Use firmwareUpdateFileName to specify the filename. A fully qualified remote location contains a supported protocol followed by a colon and two slashes (//), userid and password separated by a colon for login authentication, an @ sign, followed by the hostname or IP address of the server where the packet file resides, followed by an optional port number to the hostname, and the full pathname to the file. Note that if the port number is specified, it must be separated with the hostname (or IP address) by a colon. The MM currently supports the following protocols: TFTP, FTP, HTTP and HTTPS. The complete format of a fully qualified remote location is: ://@/ An example of a fully qualified remote location can be: ftp://USERID:PASSW0RD@192.168.0.2:30045/tmp where the ftp protocol will be used for transferring the file in this location, username is USERID, password is PASSW0RD, host IP address is 192.168.0.2, port number is 30045, and the full pathname for the packet file is /tmp. and firmwareUpdateFileName is set to: cmefs.uxp Some protocols do not need the username, password, and the port number, so the minimum requirement for a fully qualified location can be: :///. Note: When updating certain switches via SFTP, only an RSA fingerprint is supported. Please see your switch documentation for more information.