All MIBs › CME-MIB › extEthernetInterfaceIPv6StatelessAutoConfigEnabled
extEthernetInterfaceIPv6StatelessAutoConfigEnabled
Module: CME-MIB
OID (symbolic): CME-MIB::extEthernetInterfaceIPv6StatelessAutoConfigEnabled
OID (numeric): 1.3.6.1.4.1.2.3.51.2.4.9.1.4.5.3.3.1
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The IPv6 stateless auto-configuration enabled or disabled state for the ethernet interface.
NOTE: If extEthernetfInterfaceDHCPv6Enabled is currently disabled, Disabling extEthernetInterfaceIPv6StatelessAutoConfigEnabled will cause extEthernetInterfaceIPv6AutoIPConfigEnabled to be disabled.
What is extEthernetInterfaceIPv6StatelessAutoConfigEnabled?
This read-write object enables or disables IPv6 stateless address autoconfiguration (SLAAC) on the ethernet interface. An administrator toggles this to let the management module derive its own IPv6 address from router advertisements rather than requiring a DHCPv6 server. For example, an admin enables this setting on a network where router advertisements are already deployed, avoiding the need to stand up a DHCPv6 server just for the management module.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2.3.51.2.4.9.1.4.5.3.3.1 snmpwalk -v2c -c public <target> CME-MIB::extEthernetInterfaceIPv6StatelessAutoConfigEnabled
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2.3.51.2.4.9.1.4.5.3.3.1.1 snmpget -v2c -c public <target> CME-MIB::extEthernetInterfaceIPv6StatelessAutoConfigEnabled.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.2.3.51.2.4.9.1.4.5.3.3.1.1 i <value>
Start monitoring Cisco Communications Manager Express (CME) router/gateway with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CME-MIB::extEthernetInterfaceIPv6StatelessAutoConfigEnabled OID value, configure state conditions and alerts, and monitor any Cisco Communications Manager Express (CME) router/gateway from a single console.
OID Breakdown
Upper-level ancestors (13 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2 | ibm | BLADE-MIB |
| 1.3.6.1.4.1.2.3 | ibmAgents | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51 | netfinitySupportProcessorAgent | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2 | bladeCenterSnmpMIB | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2.4 | configureSP | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2.4.9 | networkConfiguration | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2.4.9.1 | networkInterfaces | BLADE-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2.3.51.2.4.9.1.4 | extEthernetInterfaceIPv6 | CME-MIB |
| 1.3.6.1.4.1.2.3.51.2.4.9.1.4.5 | extEthernetInterfaceIPv6Config | CME-MIB |
| 1.3.6.1.4.1.2.3.51.2.4.9.1.4.5.3 | extEthernetInterfaceIPv6AutoIPConfig | CME-MIB |
| 1.3.6.1.4.1.2.3.51.2.4.9.1.4.5.3.3 | extEthernetInterfaceIPv6StatelessAutoConfig | CME-MIB |
| 1.3.6.1.4.1.2.3.51.2.4.9.1.4.5.3.3.1 | extEthernetInterfaceIPv6StatelessAutoConfigEnabled | CME-MIB |