All MIBs › CME-MIB › extEthernetInterfaceIPv6AutoIPConfigEnabled
extEthernetInterfaceIPv6AutoIPConfigEnabled
Module: CME-MIB
OID (symbolic): CME-MIB::extEthernetInterfaceIPv6AutoIPConfigEnabled
OID (numeric): 1.3.6.1.4.1.2.3.51.2.4.9.1.4.5.3.1
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The IPv6 automatic IP configuration enabled or disabled state for the ethernet interface.
NOTE: extEthernetInterfaceIPv6AutoIPConfigEnabled is the logical OR of extEthernetInterfaceDHCPv6Enabled and extEthernetInterfaceIPv6StatelessAutoConfigEnabled settings. NOTE: Enabling/Disabling extEthernetInterfaceIPv6AutoIPConfigEnabled will cause both extEthernetInterfaceDHCPv6Enabled and extEthernetInterfaceIPv6StatelessAutoConfigEnabled to be enabled/disabled. NOTE: extEthernetInterfaceIPv6StaticIPConfigEnabled and extEthernetInterfaceIPv6AutoIPConfigEnabled cannot be disabled at the same time.
What is extEthernetInterfaceIPv6AutoIPConfigEnabled?
This read-write object reports and controls automatic IPv6 configuration, which the MIB defines as the logical OR of the DHCPv6-enabled and stateless-autoconfiguration-enabled settings, and toggling it flips both of those underlying settings together. An administrator uses this single switch to turn all forms of automatic IPv6 addressing on or off at once rather than managing DHCPv6 and SLAAC separately. For example, an admin disables this object to shut off both DHCPv6 and stateless autoconfiguration in one step before switching the management module to a purely static IPv6 setup.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2.3.51.2.4.9.1.4.5.3.1 snmpwalk -v2c -c public <target> CME-MIB::extEthernetInterfaceIPv6AutoIPConfigEnabled
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2.3.51.2.4.9.1.4.5.3.1.1 snmpget -v2c -c public <target> CME-MIB::extEthernetInterfaceIPv6AutoIPConfigEnabled.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.2.3.51.2.4.9.1.4.5.3.1.1 i <value>
Start monitoring Cisco Communications Manager Express (CME) router/gateway with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CME-MIB::extEthernetInterfaceIPv6AutoIPConfigEnabled OID value, configure state conditions and alerts, and monitor any Cisco Communications Manager Express (CME) router/gateway from a single console.
OID Breakdown
Upper-level ancestors (13 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2 | ibm | BLADE-MIB |
| 1.3.6.1.4.1.2.3 | ibmAgents | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51 | netfinitySupportProcessorAgent | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2 | bladeCenterSnmpMIB | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2.4 | configureSP | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2.4.9 | networkConfiguration | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2.4.9.1 | networkInterfaces | BLADE-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2.3.51.2.4.9.1.4 | extEthernetInterfaceIPv6 | CME-MIB |
| 1.3.6.1.4.1.2.3.51.2.4.9.1.4.5 | extEthernetInterfaceIPv6Config | CME-MIB |
| 1.3.6.1.4.1.2.3.51.2.4.9.1.4.5.3 | extEthernetInterfaceIPv6AutoIPConfig | CME-MIB |
| 1.3.6.1.4.1.2.3.51.2.4.9.1.4.5.3.1 | extEthernetInterfaceIPv6AutoIPConfigEnabled | CME-MIB |