All MIBs › CME-MIB › extEthernetInterfaceDHCPv6Enabled
extEthernetInterfaceDHCPv6Enabled
Module: CME-MIB
OID (symbolic): CME-MIB::extEthernetInterfaceDHCPv6Enabled
OID (numeric): 1.3.6.1.4.1.2.3.51.2.4.9.1.4.5.3.2.1
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The DHCPv6 enabled or disabled state for the ethernet interface.
NOTE: If extEthernetInterfaceIPv6StatelessAutoConfigEnabled is currently disabled, Disabling extEthernetInterfaceDHCPv6Enabled will cause extEthernetInterfaceIPv6AutoIPConfigEnabled to be disabled. NOTE: If extEthernetInterfaceIPv6StaticIPConfigEnabled and extEthernetInterfaceIPv6StatelessAutoConfigEnabled are currently disabled, Disabling extEthernetInterfaceDHCPv6Enabled will not be allowed.
What is extEthernetInterfaceDHCPv6Enabled?
This read-write object enables or disables DHCPv6 on the ethernet interface, with the MIB noting that disabling it can also disable the combined auto-IP-config setting depending on the state of stateless autoconfiguration. An administrator toggles this to control whether the management module requests an IPv6 address from a DHCPv6 server. For example, an admin disables this setting after moving the management network to stateless autoconfiguration only, no longer needing a DHCPv6 server.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2.3.51.2.4.9.1.4.5.3.2.1 snmpwalk -v2c -c public <target> CME-MIB::extEthernetInterfaceDHCPv6Enabled
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2.3.51.2.4.9.1.4.5.3.2.1.1 snmpget -v2c -c public <target> CME-MIB::extEthernetInterfaceDHCPv6Enabled.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.2.3.51.2.4.9.1.4.5.3.2.1.1 i <value>
Start monitoring Cisco Communications Manager Express (CME) router/gateway with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CME-MIB::extEthernetInterfaceDHCPv6Enabled OID value, configure state conditions and alerts, and monitor any Cisco Communications Manager Express (CME) router/gateway from a single console.
OID Breakdown
Upper-level ancestors (13 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2 | ibm | BLADE-MIB |
| 1.3.6.1.4.1.2.3 | ibmAgents | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51 | netfinitySupportProcessorAgent | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2 | bladeCenterSnmpMIB | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2.4 | configureSP | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2.4.9 | networkConfiguration | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2.4.9.1 | networkInterfaces | BLADE-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2.3.51.2.4.9.1.4 | extEthernetInterfaceIPv6 | CME-MIB |
| 1.3.6.1.4.1.2.3.51.2.4.9.1.4.5 | extEthernetInterfaceIPv6Config | CME-MIB |
| 1.3.6.1.4.1.2.3.51.2.4.9.1.4.5.3 | extEthernetInterfaceIPv6AutoIPConfig | CME-MIB |
| 1.3.6.1.4.1.2.3.51.2.4.9.1.4.5.3.2 | extEthernetInterfaceDHCPv6Config | CME-MIB |
| 1.3.6.1.4.1.2.3.51.2.4.9.1.4.5.3.2.1 | extEthernetInterfaceDHCPv6Enabled | CME-MIB |