CME-MIB :: critIO

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCME-MIBcritIO

critIO

Module: CME-MIB

OID (symbolic): CME-MIB::critIO

OID (numeric): 1.3.6.1.4.1.2.3.51.2.4.2.1.11

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: Generate an alert for any critical error condition on I/O module.

What is critIO?

This read-write integer, disabled(0) or enabled(1), controls whether an alert is generated for any critical error condition on an I/O module. An admin enables this to be notified immediately of severe switch-module failures that could take down chassis network connectivity. For example, with critIO enabled, a switch module experiencing a critical hardware fault would page the admin rather than waiting to be discovered during routine log review.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2.3.51.2.4.2.1.11
snmpwalk -v2c -c public <target> CME-MIB::critIO

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.2.3.51.2.4.2.1.11.1
snmpget -v2c -c public <target> CME-MIB::critIO.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.2.3.51.2.4.2.1.11.1 i <value>

Start monitoring Cisco Communications Manager Express (CME) router/gateway with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CME-MIB::critIO OID value, configure state conditions and alerts, and monitor any Cisco Communications Manager Express (CME) router/gateway from a single console.

OID Breakdown

Upper-level ancestors (13 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.2ibmBLADE-MIB
1.3.6.1.4.1.2.3ibmAgentsBLADE-MIB
1.3.6.1.4.1.2.3.51netfinitySupportProcessorAgentBLADE-MIB
1.3.6.1.4.1.2.3.51.2bladeCenterSnmpMIBBLADE-MIB
1.3.6.1.4.1.2.3.51.2.4configureSPBLADE-MIB
1.3.6.1.4.1.2.3.51.2.4.2remoteAlertsBLADE-MIB
1.3.6.1.4.1.2.3.51.2.4.2.1remoteAlertsCritBLADE-MIB
Numeric OIDNameModule
1.3.6.1.4.1.2.3.51.2.4.2.1.11critIOCME-MIB