All MIBs › CME-MIB › configurationBladeAutoPowerOn
configurationBladeAutoPowerOn
Module: CME-MIB
OID (symbolic): CME-MIB::configurationBladeAutoPowerOn
OID (numeric): 1.3.6.1.4.1.2.3.51.2.22.1.7.1.1.9
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Blade auto-power on policy. - restore: blade will be powered on which were previously on. - auto: blade will automatically be powered on when power is applied to the chassis. - manual: blade will be left off until manually powered on by the user. - notApplicable: is a read-only value, this value cannot be set.
What is configurationBladeAutoPowerOn?
This writable enum sets a blade's auto-power-on policy for when power is applied to the chassis: restore (power on if it was previously on), auto (always power on), manual (stay off until manually powered on), or notApplicable (a read-only state that can't be set). It matters for recovery behavior after a chassis-wide power event, since an admin running critical always-on workloads would want those blades to come back automatically rather than sit powered off. An admin managing a batch of test/dev blades that shouldn't auto-start after a chassis outage would set configurationBladeAutoPowerOn to manual(3) for those specific blades.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2.3.51.2.22.1.7.1.1.9 snmpwalk -v2c -c public <target> CME-MIB::configurationBladeAutoPowerOn
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2.3.51.2.22.1.7.1.1.9.1 snmpget -v2c -c public <target> CME-MIB::configurationBladeAutoPowerOn.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.2.3.51.2.22.1.7.1.1.9.1 i <value>
Start monitoring Cisco Communications Manager Express (CME) router/gateway with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CME-MIB::configurationBladeAutoPowerOn OID value, configure state conditions and alerts, and monitor any Cisco Communications Manager Express (CME) router/gateway from a single console.
OID Breakdown
Upper-level ancestors (15 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2 | ibm | BLADE-MIB |
| 1.3.6.1.4.1.2.3 | ibmAgents | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51 | netfinitySupportProcessorAgent | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2 | bladeCenterSnmpMIB | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2.22 | bladeCenter | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2.22.1 | processorBlade | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2.22.1.7 | bladeConfiguration | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2.22.1.7.1 | bladeConfigurationTable | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2.22.1.7.1.1 | bladeConfigurationEntry | BLADE-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2.3.51.2.22.1.7.1.1.9 | configurationBladeAutoPowerOn | CME-MIB |