All MIBs › CME-MIB › componentServiceDataDumpRetrieve
componentServiceDataDumpRetrieve
Module: CME-MIB
OID (symbolic): CME-MIB::componentServiceDataDumpRetrieve
OID (numeric): 1.3.6.1.4.1.2.3.51.2.23.15.1.1.4
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Retrieve a type of service data file from component to MM.
NOTE: This OID only is valid for the last four bit mask designations listed in the componentServiceDataDumpCapabilityMask OID.
NOTE: This OID is not used for switch modules.
The dump file is transfered to the /tftproot/service directory on the CMM. Only one file can be moved to this directory at a time, so please use the fileManagement MIB information to check if the file has been completed.
NOTE: Value returned for the GET command is meaningless for this MIB object.
What is componentServiceDataDumpRetrieve?
This object requests transfer of an already-generated dump file from a component to the MM, valid only for the dump types indicated by componentServiceDataDumpCapabilityMask, and explicitly not used for switch modules. An admin who has triggered a dump on a supported component uses this object to pull the resulting file to the MM's filesystem for retrieval. For example, an admin who triggered a partition dump on a blade would set this object to partitionDump to move the completed file over to the CMM.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2.3.51.2.23.15.1.1.4 snmpwalk -v2c -c public <target> CME-MIB::componentServiceDataDumpRetrieve
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2.3.51.2.23.15.1.1.4.1 snmpget -v2c -c public <target> CME-MIB::componentServiceDataDumpRetrieve.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.2.3.51.2.23.15.1.1.4.1 i <value>
Start monitoring Cisco Communications Manager Express (CME) router/gateway with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CME-MIB::componentServiceDataDumpRetrieve OID value, configure state conditions and alerts, and monitor any Cisco Communications Manager Express (CME) router/gateway from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2 | ibm | BLADE-MIB |
| 1.3.6.1.4.1.2.3 | ibmAgents | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51 | netfinitySupportProcessorAgent | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2 | bladeCenterSnmpMIB | BLADE-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2.3.51.2.23 | service | CME-MIB |
| 1.3.6.1.4.1.2.3.51.2.23.15 | componentServiceData | CME-MIB |
| 1.3.6.1.4.1.2.3.51.2.23.15.1 | componentServiceDataTable | CME-MIB |
| 1.3.6.1.4.1.2.3.51.2.23.15.1.1 | componentServiceDataEntry | CME-MIB |
| 1.3.6.1.4.1.2.3.51.2.23.15.1.1.4 | componentServiceDataDumpRetrieve | CME-MIB |