CME-MIB :: componentPowerDetailsPcapMax

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBs › CME-MIB › componentPowerDetailsPcapMax

componentPowerDetailsPcapMax

Module: CME-MIB

OID (symbolic): CME-MIB::componentPowerDetailsPcapMax

OID (numeric): 1.3.6.1.4.1.2.3.51.2.22.31.6.1.12

Node type: OBJECT-TYPE

Type: OCTET STRING

Access: read-only

Description: Component Module Details Table power capping Maximum value in watts. The component must support the advanced power management feature. If the value is ' Watts, Watts', which means, - if componentPowerDetailsDynamicPowerSaver is enabled, it is - otherwise it is If the value of Pcap Max is 'notApplicable', it means the component doesn't support the power capping feature. If the value of Pcap Min is 'notAvailable', it means the data could not be obtained.

What is componentPowerDetailsPcapMax?

This read-only string reports the maximum power-capping wattage a component supports, and when Dynamic Power Saver is a factor the value may appear as two numbers separated by a comma reflecting the cap with that feature enabled versus disabled. Admins use it as the upper bound when setting a power cap via componentPowerDetailsMaxPowerConfig. For example, a Pcap Max value like '400 Watts,350 Watts' tells an admin the component tops out at 400 watts normally but only 350 watts once Dynamic Power Saver is enabled.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2.3.51.2.22.31.6.1.12
snmpwalk -v2c -c public <target> CME-MIB::componentPowerDetailsPcapMax

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.2.3.51.2.22.31.6.1.12.1
snmpget -v2c -c public <target> CME-MIB::componentPowerDetailsPcapMax.1

Start monitoring Cisco Communications Manager Express (CME) router/gateway with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CME-MIB::componentPowerDetailsPcapMax OID value, configure state conditions and alerts, and monitor any Cisco Communications Manager Express (CME) router/gateway from a single console.

OID Breakdown

Upper-level ancestors (11 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.2ibmBLADE-MIB
1.3.6.1.4.1.2.3ibmAgentsBLADE-MIB
1.3.6.1.4.1.2.3.51netfinitySupportProcessorAgentBLADE-MIB
1.3.6.1.4.1.2.3.51.2bladeCenterSnmpMIBBLADE-MIB
1.3.6.1.4.1.2.3.51.2.22bladeCenterBLADE-MIB
Numeric OIDNameModule
1.3.6.1.4.1.2.3.51.2.22.31componentPowerCME-MIB
1.3.6.1.4.1.2.3.51.2.22.31.6componentPowerDetailsTableCME-MIB
1.3.6.1.4.1.2.3.51.2.22.31.6.1componentPowerDetailsEntryCME-MIB
1.3.6.1.4.1.2.3.51.2.22.31.6.1.12componentPowerDetailsPcapMaxCME-MIB

Module

This MIB depends on