All MIBs › CME-MIB › componentPowerDetailsDynamicPowerFavorPerformanceOverPower
componentPowerDetailsDynamicPowerFavorPerformanceOverPower
Module: CME-MIB
OID (symbolic): CME-MIB::componentPowerDetailsDynamicPowerFavorPerformanceOverPower
OID (numeric): 1.3.6.1.4.1.2.3.51.2.22.31.6.1.8
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: When enabled, Dynamic Power Favor Performance Over Power supports a max performance mode that pushes the system past its nominal CPU frequency when CPU and memory utilization implies it would help and the system allows it. Dynamic Power Performance Over Power can be active on the component only after Dynamic Power Saver is enabled. This feature is not available on all components types. Please refer to the component documentation for details. If a component does not support the dynamic power saver, this object will return notApplicable (255).
Under certain rare circumstances, the enabling of the dynamic power favor performance over power may not complete successfully due to interactions with other component functions, such as BIOS. Therefore, it is highly recommended that the user perform a GET of this object after performing a SET, in order to verify the completion of the intended operation.
What is componentPowerDetailsDynamicPowerFavorPerformanceOverPower?
This read-write enumeration, only meaningful once Dynamic Power Saver is already enabled, lets a component push past its nominal CPU frequency when utilization suggests it would help and the system allows it. Admins enable it on performance-sensitive workloads that still want dynamic power saver's baseline efficiency but need occasional bursts above nominal speed. For example, enabling this on a component running a bursty workload lets its CPUs briefly exceed nominal frequency during peak demand instead of capping at the standard clock.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2.3.51.2.22.31.6.1.8 snmpwalk -v2c -c public <target> CME-MIB::componentPowerDetailsDynamicPowerFavorPerformanceOverPower
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2.3.51.2.22.31.6.1.8.1 snmpget -v2c -c public <target> CME-MIB::componentPowerDetailsDynamicPowerFavorPerformanceOverPower.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.2.3.51.2.22.31.6.1.8.1 i <value>
Start monitoring Cisco Communications Manager Express (CME) router/gateway with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CME-MIB::componentPowerDetailsDynamicPowerFavorPerformanceOverPower OID value, configure state conditions and alerts, and monitor any Cisco Communications Manager Express (CME) router/gateway from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2 | ibm | BLADE-MIB |
| 1.3.6.1.4.1.2.3 | ibmAgents | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51 | netfinitySupportProcessorAgent | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2 | bladeCenterSnmpMIB | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2.22 | bladeCenter | BLADE-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2.3.51.2.22.31 | componentPower | CME-MIB |
| 1.3.6.1.4.1.2.3.51.2.22.31.6 | componentPowerDetailsTable | CME-MIB |
| 1.3.6.1.4.1.2.3.51.2.22.31.6.1 | componentPowerDetailsEntry | CME-MIB |
| 1.3.6.1.4.1.2.3.51.2.22.31.6.1.8 | componentPowerDetailsDynamicPowerFavorPerformanceOverPower | CME-MIB |