All MIBs › CME-MIB › componentEthOverUSBInterfaceEnable
componentEthOverUSBInterfaceEnable
Module: CME-MIB
OID (symbolic): CME-MIB::componentEthOverUSBInterfaceEnable
OID (numeric): 1.3.6.1.4.1.2.3.51.2.22.32.6.1.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This object allows the user to view the status of, and enable or disable, a component's interface on Ethernet-over-USB.
NOTE: If the component either does not exist or does not support Ethernet-over-USB command interface. It displays 'notApplicable'.
NOTE: It will take about 10 or more seconds for the disable/enable setting to take effect.
What is componentEthOverUSBInterfaceEnable?
This read-write enumeration lets an admin view and toggle whether a component's Ethernet-over-USB management interface is enabled, returning notApplicable(255) if the component lacks a USB command interface or doesn't support Ethernet-over-USB; changes take about 10 or more seconds to take effect. Admins use it to enable an alternate, USB-based management channel to a component, or disable it for security reasons. For example, an admin disables this object on a component to shut off its Ethernet-over-USB management path, then waits roughly 10 seconds before verifying the change took effect.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2.3.51.2.22.32.6.1.3 snmpwalk -v2c -c public <target> CME-MIB::componentEthOverUSBInterfaceEnable
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2.3.51.2.22.32.6.1.3.1 snmpget -v2c -c public <target> CME-MIB::componentEthOverUSBInterfaceEnable.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.2.3.51.2.22.32.6.1.3.1 i <value>
Start monitoring Cisco Communications Manager Express (CME) router/gateway with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CME-MIB::componentEthOverUSBInterfaceEnable OID value, configure state conditions and alerts, and monitor any Cisco Communications Manager Express (CME) router/gateway from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2 | ibm | BLADE-MIB |
| 1.3.6.1.4.1.2.3 | ibmAgents | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51 | netfinitySupportProcessorAgent | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2 | bladeCenterSnmpMIB | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2.22 | bladeCenter | BLADE-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2.3.51.2.22.32 | componentConfiguration | CME-MIB |
| 1.3.6.1.4.1.2.3.51.2.22.32.6 | componentEthOverUSBInterfaceTable | CME-MIB |
| 1.3.6.1.4.1.2.3.51.2.22.32.6.1 | componentEthOverUSBInterfaceEntry | CME-MIB |
| 1.3.6.1.4.1.2.3.51.2.22.32.6.1.3 | componentEthOverUSBInterfaceEnable | CME-MIB |