All MIBs › CME-MIB › componentConfigurationAutoPowerOn
componentConfigurationAutoPowerOn
Module: CME-MIB
OID (symbolic): CME-MIB::componentConfigurationAutoPowerOn
OID (numeric): 1.3.6.1.4.1.2.3.51.2.22.32.11.1.5
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Component auto-power on policy. - restore: component will be powered on which were previously on. - auto: component will automatically be powered on when power is applied to the chassis. - manual: component will be left off until manually powered on by the user. - notApplicable: is a read-only value, this value cannot be set.
What is componentConfigurationAutoPowerOn?
This read-write enumeration sets a component's auto-power-on policy after chassis power is applied: restore its prior on/off state, always auto-power-on, or stay off until manually powered on; notApplicable is a read-only state that can't be set. Admins configure it to control recovery behavior after a chassis-wide power event. For example, an admin sets this to auto(2) on a critical component so it powers itself back on automatically after a chassis power outage rather than waiting for someone to manually power it up.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2.3.51.2.22.32.11.1.5 snmpwalk -v2c -c public <target> CME-MIB::componentConfigurationAutoPowerOn
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2.3.51.2.22.32.11.1.5.1 snmpget -v2c -c public <target> CME-MIB::componentConfigurationAutoPowerOn.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.2.3.51.2.22.32.11.1.5.1 i <value>
Start monitoring Cisco Communications Manager Express (CME) router/gateway with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CME-MIB::componentConfigurationAutoPowerOn OID value, configure state conditions and alerts, and monitor any Cisco Communications Manager Express (CME) router/gateway from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2 | ibm | BLADE-MIB |
| 1.3.6.1.4.1.2.3 | ibmAgents | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51 | netfinitySupportProcessorAgent | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2 | bladeCenterSnmpMIB | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2.22 | bladeCenter | BLADE-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2.3.51.2.22.32 | componentConfiguration | CME-MIB |
| 1.3.6.1.4.1.2.3.51.2.22.32.11 | componentConfigurationTable | CME-MIB |
| 1.3.6.1.4.1.2.3.51.2.22.32.11.1 | componentConfigurationEntry | CME-MIB |
| 1.3.6.1.4.1.2.3.51.2.22.32.11.1.5 | componentConfigurationAutoPowerOn | CME-MIB |