All MIBs › CME-MIB › bladeIPv4ConfigPhysicalLinkState
bladeIPv4ConfigPhysicalLinkState
Module: CME-MIB
OID (symbolic): CME-MIB::bladeIPv4ConfigPhysicalLinkState
OID (numeric): 1.3.6.1.4.1.2.3.51.2.22.1.12.5.1.5
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Configuration object for requesting the physical port to be either, down(0), up(1) or loopback(2). To get the current status of a physical port, use the object, bladeIPv4ConfigPhysicalLinkStatus. If this network interface doesn't support up/down/loopback, show 'notApplicable(255)'.
What is bladeIPv4ConfigPhysicalLinkState?
This writable enum lets an admin request that a blade's physical network port be forced down, up, or into loopback mode, distinct from bladeIPv4ConfigPhysicalLinkStatus which only reports the port's current actual state. It's a diagnostic and control tool: an admin can force a port into loopback(2) to test the interface itself in isolation from the rest of the network. An admin isolating a suspected bad NIC on a blade might set bladeIPv4ConfigPhysicalLinkState to loopback(2) to run a self-test before ruling the hardware faulty.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2.3.51.2.22.1.12.5.1.5 snmpwalk -v2c -c public <target> CME-MIB::bladeIPv4ConfigPhysicalLinkState
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2.3.51.2.22.1.12.5.1.5.1 snmpget -v2c -c public <target> CME-MIB::bladeIPv4ConfigPhysicalLinkState.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.2.3.51.2.22.1.12.5.1.5.1 i <value>
Start monitoring Cisco Communications Manager Express (CME) router/gateway with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CME-MIB::bladeIPv4ConfigPhysicalLinkState OID value, configure state conditions and alerts, and monitor any Cisco Communications Manager Express (CME) router/gateway from a single console.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2 | ibm | BLADE-MIB |
| 1.3.6.1.4.1.2.3 | ibmAgents | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51 | netfinitySupportProcessorAgent | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2 | bladeCenterSnmpMIB | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2.22 | bladeCenter | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2.22.1 | processorBlade | BLADE-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2.3.51.2.22.1.12 | bladeNetworkConfiguration | CME-MIB |
| 1.3.6.1.4.1.2.3.51.2.22.1.12.5 | bladeIPv4ConfigTable | CME-MIB |
| 1.3.6.1.4.1.2.3.51.2.22.1.12.5.1 | bladeIPv4ConfigEntry | CME-MIB |
| 1.3.6.1.4.1.2.3.51.2.22.1.12.5.1.5 | bladeIPv4ConfigPhysicalLinkState | CME-MIB |