All MIBs › CME-MIB › bladeDetailsDynamicPowerFavorPerformanceOverPower
bladeDetailsDynamicPowerFavorPerformanceOverPower
Module: CME-MIB
OID (symbolic): CME-MIB::bladeDetailsDynamicPowerFavorPerformanceOverPower
OID (numeric): 1.3.6.1.4.1.2.3.51.2.2.10.4.1.1.1.8
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: When enabled, Dynamic Power Favor Performance Over Power supports a max performance mode that pushes the system past its nominal CPU frequency when CPU and memory utilization implies it would help and the system allows it. Dynamic Power Performance Over Power can be active on the blade only after Dynamic Power Saver is enabled. This feature is not available on all blade types. Please refer to the blade documentation for details. If a blade does not support the dynamic power saver, this object will return notApplicable (255).
Under certain rare circumstances, the enabling of the dynamic power favor performance over power may not complete successfully due to interactions with other blade functions, such as BIOS. Therefore, it is highly recommended that the user perform a GET of this object after performing a SET, in order to verify the completion of the intended operation.
What is bladeDetailsDynamicPowerFavorPerformanceOverPower?
This value enables or disables a mode that lets a blade push past its nominal CPU frequency when utilization suggests it would help and the system allows it, but only after Dynamic Power Saver has been enabled, returning notApplicable(255) on unsupported blades. It gives an admin a way to prioritize burst performance over strict power savings on a blade that already has dynamic power saver active. For example, enabling this on a compute-intensive blade would let its CPUs temporarily exceed their nominal frequency during heavy workloads.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2.3.51.2.2.10.4.1.1.1.8 snmpwalk -v2c -c public <target> CME-MIB::bladeDetailsDynamicPowerFavorPerformanceOverPower
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2.3.51.2.2.10.4.1.1.1.8.1 snmpget -v2c -c public <target> CME-MIB::bladeDetailsDynamicPowerFavorPerformanceOverPower.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.2.3.51.2.2.10.4.1.1.1.8.1 i <value>
Start monitoring Cisco Communications Manager Express (CME) router/gateway with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CME-MIB::bladeDetailsDynamicPowerFavorPerformanceOverPower OID value, configure state conditions and alerts, and monitor any Cisco Communications Manager Express (CME) router/gateway from a single console.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2 | ibm | BLADE-MIB |
| 1.3.6.1.4.1.2.3 | ibmAgents | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51 | netfinitySupportProcessorAgent | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2 | bladeCenterSnmpMIB | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2.2 | monitors | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2.2.10 | fuelGauge | BLADE-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2.3.51.2.2.10.4 | moduleInformation | CME-MIB |
| 1.3.6.1.4.1.2.3.51.2.2.10.4.1 | bladeDetails | CME-MIB |
| 1.3.6.1.4.1.2.3.51.2.2.10.4.1.1 | bladeDetailsTable | CME-MIB |
| 1.3.6.1.4.1.2.3.51.2.2.10.4.1.1.1 | bladeDetailsEntry | CME-MIB |
| 1.3.6.1.4.1.2.3.51.2.2.10.4.1.1.1.8 | bladeDetailsDynamicPowerFavorPerformanceOverPower | CME-MIB |