CME-MIB :: activateNetworkUpdates

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCME-MIBactivateNetworkUpdates

activateNetworkUpdates

Module: CME-MIB

OID (symbolic): CME-MIB::activateNetworkUpdates

OID (numeric): 1.3.6.1.4.1.2.3.51.2.4.9.1.16

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: When read, the return value indicates if there are any pending network updates ready to be applied. Writing any value will apply any pending network updates immediately.

What is activateNetworkUpdates?

This read-write object reports noPendingUpdates(0) or pendingUpdates(1) when read, and applies any pending network configuration changes immediately when written with any value. An administrator writes to this object after making several network setting changes, so all of them take effect together in one deliberate action rather than piecemeal. For example, an admin changes several IP-related settings then writes to this object once to apply them all at the same time, minimizing the number of brief network interruptions.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2.3.51.2.4.9.1.16
snmpwalk -v2c -c public <target> CME-MIB::activateNetworkUpdates

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.2.3.51.2.4.9.1.16.1
snmpget -v2c -c public <target> CME-MIB::activateNetworkUpdates.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.2.3.51.2.4.9.1.16.1 i <value>

SNMPv3 example:

snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> activateNetworkUpdates.1

Start monitoring Cisco Communications Manager Express (CME) router/gateway with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CME-MIB::activateNetworkUpdates OID value, configure state conditions and alerts, and monitor any Cisco Communications Manager Express (CME) router/gateway from a single console.

OID Breakdown

Upper-level ancestors (13 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.2ibmBLADE-MIB
1.3.6.1.4.1.2.3ibmAgentsBLADE-MIB
1.3.6.1.4.1.2.3.51netfinitySupportProcessorAgentBLADE-MIB
1.3.6.1.4.1.2.3.51.2bladeCenterSnmpMIBBLADE-MIB
1.3.6.1.4.1.2.3.51.2.4configureSPBLADE-MIB
1.3.6.1.4.1.2.3.51.2.4.9networkConfigurationBLADE-MIB
1.3.6.1.4.1.2.3.51.2.4.9.1networkInterfacesBLADE-MIB
Numeric OIDNameModule
1.3.6.1.4.1.2.3.51.2.4.9.1.16activateNetworkUpdatesCME-MIB