All MIBs › CM-IP-MIB › cmIpv6StateAddrAutoConfigEnabled
cmIpv6StateAddrAutoConfigEnabled
Module: CM-IP-MIB
OID (symbolic): CM-IP-MIB::cmIpv6StateAddrAutoConfigEnabled
OID (numeric): 1.3.6.1.4.1.2544.1.12.11.1.6.1.7
Node type: OBJECT-TYPE
Type: TruthValue
Access: read-write
Description:
This object describe whether enable or disable stateless address auto configuration.
What is cmIpv6StateAddrAutoConfigEnabled?
This boolean flag indicates whether stateless address autoconfiguration (SLAAC) is enabled or disabled for IPv6 on the cable modem. When enabled, the modem automatically configures its own IPv6 address from router advertisements. An operator would toggle this to control whether the modem receives addresses dynamically or requires manual static IPv6 configuration.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2544.1.12.11.1.6.1.7 snmpwalk -v2c -c public <target> CM-IP-MIB::cmIpv6StateAddrAutoConfigEnabled
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2544.1.12.11.1.6.1.7.1 snmpget -v2c -c public <target> CM-IP-MIB::cmIpv6StateAddrAutoConfigEnabled.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.2544.1.12.11.1.6.1.7.1 s <value>
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.2544 | advaMIB | ADVA-MIB |
| 1.3.6.1.4.1.2544.1 | products | ADVA-MIB |
| 1.3.6.1.4.1.2544.1.12 | fsp150cm | ADVA-MIB |
| 1.3.6.1.4.1.2544.1.12.11 | cmIPMIB | CM-IP-MIB |
| 1.3.6.1.4.1.2544.1.12.11.1 | cmIpObjects | CM-IP-MIB |
| 1.3.6.1.4.1.2544.1.12.11.1.6 | cmIpv6InterfaceTable | CM-IP-MIB |
| 1.3.6.1.4.1.2544.1.12.11.1.6.1 | cmIpv6InterfaceEntry | CM-IP-MIB |
| 1.3.6.1.4.1.2544.1.12.11.1.6.1.7 | cmIpv6StateAddrAutoConfigEnabled | CM-IP-MIB |